RCA vr622hf 用户指南

3 CH. 4 Switch  Selects the channel to which you will tune the TV to see the VCR picture if you
connect the VCR using the IN FROM ANT. and RF jacks.

AUDIO (R and L) and VIDEO IN Jacks  Receives signals from another component, like a VCR
or camcorder, when it is connected to these jacks. Use INPUT on the remote to select.

AUDIO (R and L) and VIDEO OUT Jacks  Sends signals from VCR to another component, like
a TV or VCR, when it is connected to these␣ jacks.

IN FROM ANT. Jack  Receives a signal from an antenna or cable system when attached.

OUT TO TV Jack  Passes signal to TV using the cable supplied.

HI-FI Indicator  Lights during playback when Tape Playback: HI-FI/LINEAR/MIX feature is set
to HI-FI.

POWER Indicator  Lights when the VCR is turned on.

RECORD Indicator  Lights when the VCR is recording.

STEREO  Lights when the VCR is receiving a stereo signal, and you’ve selected Stereo in the
Audio Menu.

SAP  Lights when the VCR is receiving a SAP signal, and you’ve selected SAP in the Audio
menu.

TIMER Indicator  Lights during an express or timer recording, or when the VCR is set for a
timer recording and the VCR is turned off. Flashes when a timer recording is set, and there is
no cassette in the VCR.

VCR Indicator (Applies Only if the VCR Viewing Channel is 3
or 4). Press the TV•VCR button to turn on or off.

•

VCR indicator on: Picture from VCR.

•

VCR indicator off: Picture from TV channel.

   

  

  3 CH. 4

IN FROM
ANT.

VIDEO

OUT  

R-AUDIO-L

OUT TO TV

VHF/UHF

MONO

IN 1