RCA vr645hf 用户指南
11
Setting Up the VCR
2.
Press 4 to display the CHANNELS menu.
CHANNELS
1 Auto Channel Search
2 Add/Remove Channels
3 Signal Type: CABLE
4 VCR Plus+ Channel List
5 Cable Box Setup
2 Add/Remove Channels
3 Signal Type: CABLE
4 VCR Plus+ Channel List
5 Cable Box Setup
0 Exit
3.
Press 1 to display the AUTO CHANNEL SEARCH menu.
AUTO CHANNEL SEARCH
What type of signal
are you using?
are you using?
1 Cable TV
2 Antenna
3>Detect Automatically
2 Antenna
3>Detect Automatically
0 Cancel
4.
Select one of the three AUTO CHANNEL SEARCH options.
Choices one and two are self-explanatory. If you choose
Detect Automatically, the VCR automatically detects which
signal system you have attached to your VCR.
Detect Automatically, the VCR automatically detects which
signal system you have attached to your VCR.
AUTO CHANNEL SEARCH
Now scanning channel 14
Press any key to cancel
The VCR begins scanning for the available channels--this
takes about one to two minutes. The lowest channel is tuned
once the search is complete. Now pressing CHAN up or down
should only select the active channels.
takes about one to two minutes. The lowest channel is tuned
once the search is complete. Now pressing CHAN up or down
should only select the active channels.
To Change the Signal Type
1.
Press MENU to display the VCR MAIN MENU.
2.
Press 4 to display the CHANNELS menu.
3.
Press 3 to change the Signal Type between CABLE and
ANTENNA.
ANTENNA.
Auto Channel Search
Use the Auto Channel Search feature
to place all available channels in
memory.
to place all available channels in
memory.
If you ever change cable or antenna
signals, you may need to Auto
Channel Search again.
signals, you may need to Auto
Channel Search again.
Detect Automatically
A strong cable or antenna signal in
your area may cause Auto Detect to
mis-detect. If this should happen,
select 1 or 2 for the system you have.
your area may cause Auto Detect to
mis-detect. If this should happen,
select 1 or 2 for the system you have.