RCA vr647hf 用户指南

INPUT  Selects between the TV’s input channel or tuner. Press to
see the VCR signal if you connected your VCR using the
AUDIO/VIDEO jacks.

MUTE  Reduces volume to minimum level.

Numbers (0 through 9)  Select a channel up to 99 by pressing
two numbers. Select a cable channel over 99 by pressing and
holding 1 until 1 – – appears on the screen. Then press the other
two numbers.

ON•OFF  Turns a compatible TV off and on.

VOL Up and Down  Raises and lowers sound of TV.

1.

Tune the TV to your VCR viewing channel (3, 4, or TV’s video
input- see page 68 for more about the video input channel).

2.

Insert a tape in the VCR.

If the Auto Play feature is set to ON, the tape automatically
begins playback (if the safety tab on the cassette is removed).

•

Press FWD or REV to position the tape.

•

Press PLAY PAUSE (if necessary) on the VCR (PLAY on remote)
to begin tape play.

•

Press PLAY PAUSE (PAUSE on remote) for stop action.

•

Press TRACKING up or down to remove any streaks from the
picture, if necessary.

•

Press STOP•EJECT on VCR (STOP on remote) to stop playback.

The VCR automatically rewinds the tape if it reaches the end of
the tape during playback. While rewinding, you can press
POWER on the VCR (ON•OFF on remote) and the VCR will turn
off after rewinding.