RCA vr701hf 用户指南

Your VCR has automatic tracking which removes
interference like streaks or “snow” from the picture.
Automatic tracking is automatically activated when you
insert a tape or turn on the VCR. Occasionally you may
need to manually adjust tracking, especially if the tape was
recorded on a different VCR. Just use the TRACKING
buttons to reduce the distortion. You can also use tracking
when you pause a tape to reduce jittering of the picture.

When you manually adjust the picture, automatic tracking
is turned off. To turn automatic tracking back on, press
both TRACKING buttons on the front of the VCR at the
same time, or eject the tape and re-insert it. Tracking has
no effect during recording– only playback.

To disable the usage of the VCR, or to protect your timer
recordings, you can lock the VCR so that the buttons on the
VCR or remote won’t work.

To Lock: Press and hold the VCR button on the remote
for approximately six seconds. SAFE appears.

•

To Lock While a Timer Recording is in Progress:
Press and hold the VCR button on the remote for
approximately six seconds.

•

To Unlock: Press and hold the VCR button on the
remote for approximately six seconds.

The time counter shows the actual time it takes to record a
program or play back a segment of a recorded tape. It
helps locate the beginning or end of programs you taped.
The time counter resets to 0:00:00 whenever the tape is
ejected from the VCR.

For example, if you record a 30–minute program at the
beginning of the tape and you want to go to the end of
that program to begin another recording, you would:

1. Press INFO twice to display only the time counter.

2. Press CLEAR to reset the time counter to 0:00:00.