RCA vrm420 用户指南
VCR Features
Chapter 4
35
Slow Motion
You can view a tape during play or play-pause mode using Slow Motion search.
1.
In pause mode, press the FORWARD (FWD) or REVERSE (REV) button to start slow-motion playback.
2.
Press the FORWARD button to increase or the REVERSE button to decrease the search speed.
3.
Use the TRACKING + or – buttons to remove any streaks from the picture.
4.
Press the PLAY button to return to normal playback.
The VCR switches automatically from slow-motion playback to stop after a few uninterrupted minutes.
Frame Advance
Frame Advance lets you view single-frame action during playback.
1.
While playback is in progress, press the remote control’s PAUSE button (PLAY/PAUSE on the VCR) to freeze the
action.
action.
2.
Press the F. ADV button on the remote control each time you want to view the next frame of the recording.
3.
Press the PAUSE or PLAY button on the remote control (PLAY/PAUSE on the VCR) to return to normal playback.
Index Search
The VCR has a “VHS Index Search System” that automatically records index marks on the tape every time
you start a recording. During playback you can locate the program you want to play by the number of
index marks or by scanning. The VCR will search forward or reverse from the location you are at on
the tape.
you start a recording. During playback you can locate the program you want to play by the number of
index marks or by scanning. The VCR will search forward or reverse from the location you are at on
the tape.
To Activate Index Search:
1.
While playing back, press the STOP button to freeze the action.
2.
Press the SEARCH button on the remote control to display the INDEX
SEARCH screen on the TV screen.
SEARCH screen on the TV screen.
3.
If you want to search through a certain number of index marks, press two
number buttons to enter the number of marks you want to search. Press the
CLEAR button on the remote control to correct an entry.
number buttons to enter the number of marks you want to search. Press the
CLEAR button on the remote control to correct an entry.
4.
Press the FORWARD button to search forward or the REVERSE button to
search in reverse. The VCR will locate your index mark and begin playback.
If you did not enter a specific index number, the VCR will locate the next
index mark and begin playback.
search in reverse. The VCR will locate your index mark and begin playback.
If you did not enter a specific index number, the VCR will locate the next
index mark and begin playback.
5.
Press STOP to stop Index Search.
Notes– Certain index marks may be missed by the VCR including:
•
•
Marks too close to the current location of the tape.
•
Those at the beginning of a recording lasting five minutes or less.
•
Index marks that start at the beginning of the tape.
INDEX SEARCH
Press REV or FWD
to begin scanning
OR
enter a specific
index number
to begin scanning
OR
enter a specific
index number
--
Press SEARCH to exit