RCA vrm420 用户指南
26
Chapter 3
Using the Remote Control
INP
UT
TV
•VCR
PLAY
FORWARD
RECORD
STOP
PAUSE
F.ADV
CLEAR
MENU
SPEED
TRACKING
1
4
7
2
5
8
3
6
9
0
CHAN
V
O
L
V
O
L
CHAN
INFO
SEARCH
MUTE
GO BACK
VCR
ON•OFF
TV
REVERSE
Using the Remote Control
The remote control is capable of controlling more than just your VCR. If
you have compatible RCA, GE, or Proscan TV, you may be able to
control it without having to program the remote. If you have another
brand of TV, your VCR’s remote control may be able to operate it once it
has been programmed. This chapter offers details about programming
the remote control and operating TVs.
you have compatible RCA, GE, or Proscan TV, you may be able to
control it without having to program the remote. If you have another
brand of TV, your VCR’s remote control may be able to operate it once it
has been programmed. This chapter offers details about programming
the remote control and operating TVs.
In order for the VCR’s remote control to operate a desired TV, you must
first press the TV button on the remote control. To control the VCR,
press the VCR button on the remote control. Pressing any remote control
button will affect either the VCR or the TV, depending on which is the
active device the remote control is set to operate.
first press the TV button on the remote control. To control the VCR,
press the VCR button on the remote control. Pressing any remote control
button will affect either the VCR or the TV, depending on which is the
active device the remote control is set to operate.
Buttons of the Remote Control
0-9 (Number buttons)
Enter channel numbers, time settings, and on-
screen display menu choices directly using the remote control.
To enter a two-digit channel, press the two digits. To enter a three-digit
channel, press and hold the first digit for two seconds until two dashes
appear to the right of the number, then add the second two. Example: to
tune to channel 123, press and hold the 1 button for two seconds, then,
when the dashes appear (--) press 2, then press 3.
channel, press and hold the first digit for two seconds until two dashes
appear to the right of the number, then add the second two. Example: to
tune to channel 123, press and hold the 1 button for two seconds, then,
when the dashes appear (--) press 2, then press 3.
CHAN (up and down) buttons
Scan up or down through the VCR’s
stored channels. Press once to change the channel up or down; press
and hold to continue changing channels.
and hold to continue changing channels.
CLEAR
Removes any menu or information display from the screen and
returns the display view to normal. This button also resets the counter to
00:00 when the counter is displayed on-screen.
00:00 when the counter is displayed on-screen.
FORWARD
Advances the tape in the VCR forward. In Play mode, the
FORWARD button starts forward playback. In Stop mode, the FORWARD
button starts fast-forwarding.
button starts fast-forwarding.
F. ADV (Frame Advance)
Advances the tape one frame at a time
during play-pause mode.
GO BACK
Depending on which component the remote control is set to
operate, this button returns the TV or VCR to the previously viewed
channel.
channel.
INFO
Shows the VCR’s status displays on the TV screen. Press the
INFO button once to display the day, date, time, and tape counter. Press
the INFO button a second time to display just the tape counter. Press the
INFO button a third time to clear the displays.
the INFO button a second time to display just the tape counter. Press the
INFO button a third time to clear the displays.
INPUT
Selects between the video line inputs and the VCR’s tuner.
Video line input refers to the signal coming from another component
(such as a camcorder) connected to the A/V input jacks on the back or
front of the VCR. L1 designates the rear A/V jacks and L2 denotes the
front jacks.
(such as a camcorder) connected to the A/V input jacks on the back or
front of the VCR. L1 designates the rear A/V jacks and L2 denotes the
front jacks.