Printronix SL4M 用户指南
140
Chapter
4
INTERFACES Menu
•
Dial Method
•
Tone (factory default). Sets the modem to use the tone dialing
method.
method.
•
Pulse. Sets the modem to use the pulse dialing method.
•
PNE Port Number. This menu selects the port number the printer
expects the PNE to connect through. The factory default is 3001 and the
range is from 1023 to 65535.
expects the PNE to connect through. The factory default is 3001 and the
range is from 1023 to 65535.
•
PNE Port Timeout. If the PNE has not communicated to the printer within
a timeout period, the PNE session closes. The factory default is 100
seconds. The range is from 1 to 255 seconds.
a timeout period, the PNE session closes. The factory default is 100
seconds. The range is from 1 to 255 seconds.
•
Status Port Number. This is the Ethernet Port number the emulations
can use to communicate status to the host computer.
can use to communicate status to the host computer.
•
Mgmt Port Number. This is the Ethernet Port number the PXML or UCP
will use to communicate to the printer.
will use to communicate to the printer.