Printronix SL4M 用户手册
164
Chapter
5
Downloading TrueType Fonts
12. To verify that the fonts have been downloaded:
NOTE: Admin User must be set to Enable in the PRINTER SETUP menu.
a.
Perform a configuration printout.
— OR —
b.
Select PRINTER SETUP
Main FFS
View File List. The new file
names will appear with the same file name you downloaded, but with
a .ttf extension.
a .ttf extension.
NOTE: The TrueType font typefaces cannot be selected via the printer
control panel. They can only be selected via a software command
from the host.
from the host.
13. Press (Pause) key to place the printer online and return the printer to
normal operation.
Download TrueType Fonts Via The Ethernet Using FTP
1.
Put the printer into download mode. See “Download Mode” on page 162.
2.
Use FTP to transfer the binary font file (.dwn instead of .prg) to the printer
through the Ethernet. See “Downloading Software Through The NIC
Using FTP” on page 156. Follow the instructions for flash download
operation.
through the Ethernet. See “Downloading Software Through The NIC
Using FTP” on page 156. Follow the instructions for flash download
operation.
Once the fonts are loaded, they will be visible in a configuration listing or in a
View File List menu option. It may be necessary to enable Admin User to see
the View File List menu. The font files will be shown with extension .ttf for
“TrueType font.”
View File List menu option. It may be necessary to enable Admin User to see
the View File List menu. The font files will be shown with extension .ttf for
“TrueType font.”
PTX_SETUP
PTX_SETUP can be used to load TrueType fonts into the file system. Please
see the PTX_SETUP chapter in the PGL Programmer’s Reference Manual for
details.
see the PTX_SETUP chapter in the PGL Programmer’s Reference Manual for
details.
Example:
!
PTX_SETUP
FILE_IO-CAPTURE; “ARIAL.TTF”.
PTX_END
PTX_END
Arial TrueType font binary data
NOTE: Do not add any LF/FF at the end of the binary data
!PTX_SETUP
FILE_IO-CAPTURE;””.
PTX_END
FILE_IO-CAPTURE;””.
PTX_END