Printronix P5000LJ 参考手册
130
Chapter
4
Configuring the Proprinter III XL Emulation with Control Codes
Line Feed
ASCII Code LF
Hex Code
0A
Dec Code
10
Purpose
Prints the data in the buffer (if any) and advances the paper one
line at the current line space setting.
line at the current line space setting.
Discussion If configured for LF equals new line (LF = CR + LF), the logical
print head is positioned at character column 1 of the new line.
Otherwise, the logical print head does not move when
configured for LF function only (LF = LF only). The LF function
cancels double wide (expanded) characters if set by the SO
command.
Otherwise, the logical print head does not move when
configured for LF function only (LF = LF only). The LF function
cancels double wide (expanded) characters if set by the SO
command.
Line feed can occur at any place in the datastream and is acted
upon immediately.
upon immediately.
Table 31.
n5 Values
n5 Bit
Function
OFF (0)
ON (1)
7
Process this byte
Process
Ignore
6
Code page
437
850
5
Unidirectional
Printing
Printing
Bidirectional
Unidirectional
4
12 cpi compressed
to 20
to 20
20
12
3
n/a
n/a
n/a
2
Form feed at TOF
Enable
Ignore
1
Print Width
13.2 inches
8 inches
0
Sheet feeder
n/a
n/a