Toshiba TDP-S9 业主指南

9

If your line voltage is 220 to 240V, use one of the following types of cable.

Plug

configuration Plug type

Australian

240V

10A

North American

240V

15A

Switzerland

240V

6A

Line voltage

EURO

UK

220 – 240V

220 – 240V

200 – 240V

200 – 240V

200 – 240V

Plug

configuration Plug type

Line voltage

Use a 5A fuse which is approved by ASTA 

or BSI to BSI362.

Always replace the fuse cover after 

changing the fuse.

The original shipping carton and packing materials will come in handy if you ever have to ship your
projector. For maximum protection, repack the set as it was originally packed at the factory.

Never operate this unit immediately after moving it from a cold location to a warm location. When the
unit is exposed to such a change in temperature, moisture may condense on the crucial internal
parts. To prevent the unit from possible damage, do not use the unit for at least 2 hours when there is
an extreme or sudden change in temperature.

• Do not place in hot locations, such as near heating equipment.  Doing so could cause malfunction,

and shorten the life of the projector.

• Avoid locations with oil or cigarette smoke.  Doing so will dirty the optical parts, shortening their

lives, and darkening the screen.

• Do not use the product vertically in any upright position or slantwise in an angle of 20 degrees or

more.

• Using this instrument near a TV or radio may cause interference to the images or audio sound. If this

happens, move it away from the TV or radio.

• Moving the projector from a low-temperature room to a high-temperature room may cause

condensation on the lens or internal parts in the instrument. If you continue to use it in that situation,
the malfunction may result. Ensure to wait until the condensation naturally disappears.

• In a high altitude location where air is thin, cooling efficiency is reduced so use it with the ambient

temperature being lowered.