Toshiba tdp-tw100u 业主指南

25

24

• The start-up screen will disappear after a moment. You can dismiss the start-up screen

before this by performing any operation. You can also configure the start-up screen not to
appear via the Display setting menu 

.

• The first time you use the projector after purchase, after the start-up screen disappears,

the start menu is displayed 

.

• When [Key lock] is [On], the operation buttons of the projector do not work 

.

• When [Password] is [On], enter password then the start-up screen is displayed after the

Password entry screen disappears 

.

■ Turning the power off

A message appears on the screen, confirming that you wish to shut off the power. This
message will disappear after a moment. (This operation is no longer valid after the
message disappears.)

The screen turns off, but the internal cooling fan continues to operate for a short while.
Then, the projector goes into standby mode.

During cooling, the LAMP indicator flashes. In this state, the power cannot be
turned back on.
If you are in a hurry, there is no problem with unplugging the power cord in this
state.

After the LAMP indicator goes off, the FAN indicator keeps lighted and the
cooling fan continues to operate for a short while, in order to expel excess
internal heat.

In standby mode

• The projector consumes about 9W of power in standby. We recommend that you unplug

the power cord if you will not be using the projector for an extended period.
(When [Wireless standby] is [On], it consumes about 12W during standby.)

• If the power cord is unplugged before cooling is complete, give the lamp time (about 5

minutes) to cool before plugging it back in. If the lamp overheats, it may fail to light.

When cooling lamp

During internal cooling

After cooling complete

Operations

■ Connecting the power cord

The ON/STANDBY indicator will
change to orange, indicating standby
mode.

■ Removing the lens cover

Be sure to remove the lens cover when the power is
turned on. If it is left on, it could become deformed due
to heat.

■ Turning the power on

The power turns on, and the following
3 green indicators light: ON/STANDBY,
LAMP, and FAN. After a moment, the
start-up screen appears.

• Do not look into the lens while the lamp is on.  The strong light from the lamp may cause

damage to your eyes or sight.

• Do not block the air intake or exhaust. Doing so could cause a fire due to internal overheat-

ing.

• Do not place your hands, face, or other objects near the air exhaust. Doing so could cause

burns, deform/break the object.

Power cord connector
(Supplied)