Toshiba tdp-wx5400u 用户指南

56

57

Item p q

Set the projection mode. Press   and select the projection mode using p q. 

• Standard—standard forward facing projection.

• Rear ceiling—inverts and reverses the image for ceiling mounted projection from behind the screen.

• Rear—reverses the image for projection from behind the screen.

• Ceiling—inverts the image for standard ceiling mounted projection.

Display time Set the menu display time. Press   and select the display time using p q. 

Continuous/5 sec./15 sec./45 sec.

Background Set the default background appearance. Press   and select the background using p q. 

Blue/None/Logo

.

Enable or disable the key lock security feature. When enabled, the control panel on the 
projector is locked—the menus can only be accessed using the remote control.  
Press   and select On or Off using p q. 

DynamicBlack Enable or disable DynamicBlack. The DynamicBlack feature improves the appearance of black 

areas of the projected image. Press   and select On or Off using p q.

Enable or disable the front and reaer remote control sensors. Press   and select the 

sensor mode using p q. 
Both/Front/Rear.

Configure the network settings if the projector is connected to a network. Enable DHCP or 
disable DHCP and enter network IP address information in the supplied fields.
Select 

Apply settings to confirm the network information 

.

Standby mode Select the desired standby mode. Press   and select the standby mode using 

p

 q.

Standard/Power-saving

Select the path for PC Control. Press   and select the PC control path using p q.

PC control/Network



If you set 

DHCP to Enable, the IP address of the projector is assigned automatically 

by the DHCP server. If your network environment does not assign IP addresses 

automatically, set 

DHCP to Disable, then set the following items manually.

IP address and Subnet are required fields if 

DHCP is set to Disable.

When 

DHCP is set to Disable, consult with your network administrator for the settings 

below and set the 

IP address manually.

An IP address is a unique number assigned to a device. The format is a string of four dot-

separated three-digit numbers. (Example: 111.112.xxx.xxx)

A subnet mask is used to determine what subnet the IP address assigned to a device belongs to. 

(Example: 255.255.xxx.xxx)

This value specifies the IP address of the device, such as a router, to be used to access servers 

outside the network. (Example: 111.112.xxx.xxx)

This value specifies the IP address of a 

Domain Name Server (DNS) if present.  

(Example: 111.112.xxx.xxx)

Select 

Apply settings to confirm the projector’s new network settings.

•