Toshiba tlp-x150u 用户指南
Operations
Freezing the image (Freeze)
This function is used to pause or freeze a video during a presentation.
Press the remote control’s FREEZE button.
The picture will pause. To release the freeze function, press the
FREEZE button again.
FREEZE button again.
Notes
The
icon will appear while the freeze function is in effect.
Other operations will also release the freeze function.
Even if an image is frozen on the projector, the pictures are running
on the video or other equipment.
Using this function on commercial video software, broadcast or
cable-broadcasting except for the purpose of your private viewing
and listening may infringe the copyright protected by the copyright
laws.
Even if an image is frozen on the projector, the pictures are running
on the video or other equipment.
Using this function on commercial video software, broadcast or
cable-broadcasting except for the purpose of your private viewing
and listening may infringe the copyright protected by the copyright
laws.
Setting the password
How to change password
The default password is 000000.
1
Select [Password] in the Default setting 2 menu and press the
or
button.
2
Select [Password registration] from the next menu, and press the
button.
The password entry screen is displayed.
3
Enter the current password (6-digit number) using numeric keys of the
remote control.
Enter [000000] (6 zeros) for the first change.
The password is not displayed. Instead it appears as [******].
The password is not displayed. Instead it appears as [******].
4
Enter a new password (6-digit number).
5
Re-enter the new password for confirmation.
Note
Please do not forget your password or you will be unable to access the unit. If
that happens, you will need to contact your dealer.
that happens, you will need to contact your dealer.
•
•
•
•
•
•
•
•
•
•
Remote
control
How to set password (from [Off] to [On])
1
Select [Password] in the Default setting 2 menu and press the
or
button.
2
Select [Password setting], and press the
or
button.
3
Select [On].
4
Select [OK] and press the
button.
The password entry screen is displayed.
5
Enter the password using the numeric keys of the remote control.
6
The password setting will be set as [On].
How to operate when password is [On]
1
Turn on the power.
2
The lamp lights and the password entry screen appears.
3
Enter the password using the numeric keys of the remote control.
If the entered password is correct, the start-up screen appears and the projector
goes into normal operation. If the password is incorrect, a message will appear
prompting you to re-enter the password, and the password entry screen is displayed
again. If you enter an incorrect password more than 5 times, the projector will
automatically power off and enter standby mode.
goes into normal operation. If the password is incorrect, a message will appear
prompting you to re-enter the password, and the password entry screen is displayed
again. If you enter an incorrect password more than 5 times, the projector will
automatically power off and enter standby mode.
Note
When the password setting is [On], the password function will be enabled only
when the projector is restarted after the power cord has been unplugged.
The password that you set will not be enabled when restarting from standby mode
without unplugging the power cord.
when the projector is restarted after the power cord has been unplugged.
The password that you set will not be enabled when restarting from standby mode
without unplugging the power cord.
How to set password (from [On] to [Off])
1
Select [Password] in the Default setting 2 menu and press the
or
button.
The password entry screen is displayed.
2
Enter the password using the numeric keys of the remote control.
3
Select [Password setting] and press the
or
button.
4
Select [OFF].
5
Select [OK] and press the
button.
•
Using handy features (Continued)