Toshiba TLP-450 用户手册

(Continued)

Check that the power for the projector and computer is off before
connecting the cables.

Check that the power for the projector and computer is off before
connecting the cables.

• Sound of the source which you select is output to the connected

stereo system, etc.

• The MONITOR OUTPUT connector always sends out a signal which

is input to the RGB INPUT connector regardless of your source
selection.

• Even while the projector is in standby mode, the MONITOR OUTPUT

connector continues its output.

Signal input to the S-VIDEO jack takes priority over that to the VIDEO
jack.

To MONITOR OUTPUT (AUDIO) 
Ø3.5mm STEREO mini plug
(Audio output level is constant.)

To audio input

Audio cable
(not supplied)

Connect a stereo system
for dynamic sound.

You can connect an 

extra monitor to view 

the picture.

You can connect a computer 
to control the projector.

To VIDEO
 INPUT
(S-VIDEO)

To S-VIDEO output

To Video output (yellow)

To Audio output (white)

To Audio output (red)

Audio/Video cable (supplied)

S-VIDEO cable (not supplied)

To  RGB 

INPUT 

(RGB) 

To RGB 

INPUT 

(AUDIO) 

To CR(PR) output

To CB(PB) output
To Y output 

Audio cable (not supplied)

(not supplied)

To audio output L 

(white)

To audio output R 

(red)

To VIDEO INPUT (VIDEO) (yellow)

To VIDEO INPUT (AUDIO L) (white)

To VIDEO INPUT (AUDIO R) (red)

Video tape player

Video player with color difference output