Toshiba 42RV535U 用户指南
33
RV535U (E/F) Web 213:276
Chapter 5: Setting up your TV
Setting the HDMI
™
audio mode
To set the HDMI audio mode:
1
From the Audio menu, highlight Audio Setup and
press T.
press T.
2
Press B or b to select HDMI 1 Audio and then press
C or c to select the HDMI 1 audio mode (Auto,
Digital
C or c to select the HDMI 1 audio mode (Auto,
Digital
, or Analog). (Auto is the recommended
mode.) See “Connecting an HDMI or DVI device to
the HDMI input” (- page 16).
the HDMI input” (- page 16).
3
To save your settings, highlight Done and press T.
Note: Because the PC and HDMI 1 inputs share the same set
of analog audio inputs, the PC Audio menu setting influences
the HDMI 1 Audio menu setting. If PC Audio is set to “No,” the
HDMI 1 Audio setting changes to “Auto.” If PC Audio is set to
“Yes,” the HDMI 1 Audio setting is set to “Digital” and is
grayed out in the menu. (Also see item 4 on page 11 and
“Setting the PC Audio” on page 51.)
of analog audio inputs, the PC Audio menu setting influences
the HDMI 1 Audio menu setting. If PC Audio is set to “No,” the
HDMI 1 Audio setting changes to “Auto.” If PC Audio is set to
“Yes,” the HDMI 1 Audio setting is set to “Digital” and is
grayed out in the menu. (Also see item 4 on page 11 and
“Setting the PC Audio” on page 51.)
Viewing the digital signal meter
You can view the digital signal meter in the ANT/
CABLE digital TV input source only.
CABLE digital TV input source only.
To view the digital signal meter:
1
From the Setup menu, highlight Installation and
press T. A new set of Installation menu icons will
appear.
press T. A new set of Installation menu icons will
appear.
2
Open the Terrestrial menu, highlight Signal Meter,
and press T.
and press T.
3
Press BbC c to select the digital channel whose
signal you want to check.
signal you want to check.
Note:
• The physical digital channel number listed in the Signal
Meter screen may not correspond to a virtual TV
channel number. Contact your local broadcasters to
obtain the RF channel numbers for your local digital
stations.
channel number. Contact your local broadcasters to
obtain the RF channel numbers for your local digital
stations.
• The signal strength does not change between virtual
channels on the same physical channel.
To close the screen and return to the Terrestrial
menu:
menu:
Highlight Done and press T.
To return to normal viewing:
Press O.
Mode
Description
Auto
When viewing the HDMI 1 input, if
digital audio from the HDMI input
is available, it will be output. If not,
the TV will automatically detect and
output analog audio from the PC
Audio input.
digital audio from the HDMI input
is available, it will be output. If not,
the TV will automatically detect and
output analog audio from the PC
Audio input.
Digital
When viewing the HDMI 1 input,
digital audio from the HDMI input
will be output.
digital audio from the HDMI input
will be output.
Analog
When viewing the HDMI 1 input,
analog audio from the PC Audio
input will be output.
analog audio from the PC Audio
input will be output.
Done
Audio Setup
Language
Reset
MTS
Stereo
English
Dolby Digital
Optical Output Format
HDMI 1 Audio
PC Audio
No
Auto
Dynamic Range Control
Compressed
Dolby Digital
52RV535U_EN.book Page 33 Tuesday, July 22, 2008 5:25 PM