Netopia r7100-c 参考指南

11. Type the Primar y Domain Name Ser ver address your ISP gave you. Press Return. A new field Secondary 

Domain Name Server will appear. If your ISP gave you a secondar y domain name ser ver address, enter it 
here. Press Return until the next field Default IP Gateway is highlighted.

12. Enter the Default IP Gateway address your ISP gave you. Press Return.

13. Press the Down arrow key until you reach NEXT SCREEN. Press Return.

14. Do this again, through the next two screens until you reach RESTART DEVICE. When RESTART DEVICE is 

highlighted, press Return. When prompted, select CONTINUE, and press Return.

The Router will restar t and your configuration settings will be activated. You can then Exit or Quit your Telnet 
application.

Note: For more Easy Setup options, see the next section. For more Frame Relay configuration options see 

.

You always access Easy Setup by selecting Easy Setup in the Main Menu, then pressing Return.

1.

The SDSL Line Configuration menu screen appears.

2.

Select Data Link Encapsulation and press Return. The pop-up menu offers you the choice of Frame Relay 
or ATM FUNI. If you select Frame Relay, see 

. Select the one your 

ISP uses and press Return.

                            SDSL Line Configuration

                                          +-------------+
                                          +-------------+
         Data Link Encapsulation...       | Frame Relay |
                                          | ATM FUNI    |
                                          +-------------+

         TO MAIN MENU                       NEXT SCREEN