Quantum atl 7100 用户指南
Chapter 2 Operating the Library
Operating Procedures
Operating Procedures
18
Quantum|ATL 7100 Series Library Operator’s Guide
2
Press the load port
OPEN
button and verify the indicator
begins blinking. (It may take several seconds for the load port
door to automatically open.)
door to automatically open.)
3
With the load port door open, place the tape cartridge(s) in any
available bin (see
available bin (see
).
4
Press the load port
CLOSE
button.
5
When the
CLOSE
indicator is steadily lit, push the load port
door closed. (The library will lock the door.)
Figure 11 Inserting
and Removing Tapes
and Removing Tapes
Caution:
Mechanical hazards could be exposed when the
load port is partially open or closed. Do not
attempt to insert hands or fingers into the load
port opening at any time.
load port is partially open or closed. Do not
attempt to insert hands or fingers into the load
port opening at any time.
Caution:
The load port door is locked in the open position.
You must press the
You must press the
CLOSE
button before
attempting to close the load port door.
Tape cartridge
Bar code label
Load port
opens to right/
closes to left