Mitsubishi hs-hd1100u 用户手册
34
7
If you wish to change the record speed, press ENTER repeatedly until the
record speed is flashing. Change the recording speed by pressing the
ADJUST buttons. Press ENTER.
record speed is flashing. Change the recording speed by pressing the
ADJUST buttons. Press ENTER.
8
To program additional recording times, select an empty program line by
pressing the ADJUST buttons. Press ENTER. You will return to the VCR
Plus+ system menu. Continue the VCR Plus+ system programming procedure
from step 3.
pressing the ADJUST buttons. Press ENTER. You will return to the VCR
Plus+ system menu. Continue the VCR Plus+ system programming procedure
from step 3.
9
When you are finished with all programming, check the following:
• If you have a cable box, leave the box tuned to the station you wish to
• If you have a cable box, leave the box tuned to the station you wish to
record.
• Turn the VCR power OFF and make sure the programmed recording light is
lit.
If you want to stop the programmed recording after it starts, press POWER on the
front panel.
front panel.
Quick Program
Quick Program is an exclusive Mitsubishi feature that simplifies the process of
programming your VCR to record. When you press QUICK PROGRAM/VCR Plus+
on the remote control, you will immediately see the VCR Plus+ system menu and
can begin programming right away.
programming your VCR to record. When you press QUICK PROGRAM/VCR Plus+
on the remote control, you will immediately see the VCR Plus+ system menu and
can begin programming right away.
You can use this feature even when the VCR is stopped, playing, fast forwarding,
rewinding, or off (Quick program does not work during recording.).
rewinding, or off (Quick program does not work during recording.).
1
Press QUICK PROGRAM/VCR Plus+ on the remote control. If the VCR is off,
it will turn on. After tuning your TV to the correct channel or input, VCR Plus+
system menu will appear.
it will turn on. After tuning your TV to the correct channel or input, VCR Plus+
system menu will appear.
IMPORTANT
If the VCR memory is full, Program memory is full will appear for 3 seconds
and then the Recap screen will appear. Use CANCEL to erase an entry
before you can add another one.
and then the Recap screen will appear. Use CANCEL to erase an entry
before you can add another one.
2
Complete steps 3 through 10 in Conventional VCR timer recording. (See
page 31.)
When you have finished, press QUICK PROGRAM/VCR Plus+ again.
page 31.)
When you have finished, press QUICK PROGRAM/VCR Plus+ again.
If the VCR is stopped, it will turn off and be ready to record your program at
a later time.
a later time.
If the VCR is playing, fast forwarding or rewinding, the menus will turn off,
but the VCR power will remain on.
but the VCR power will remain on.
3
When you are finished with entering the programs you wish to record, check
the following:
• If you have a cable box, leave the box tuned to the station you wish to
the following:
• If you have a cable box, leave the box tuned to the station you wish to
record.
• Make sure the VCR is turned OFF and the programmed recording light is lit
before the recording time.
IMPORTANT
If you press QUICK PROGRAM/VCR Plus+, but the clock is not set, Set the
clock menu will appear. Set the clock manually.
clock menu will appear. Set the clock manually.
POWER
Timer Recording
¬Program to record
ƒChannel 2
ƒDay Monday 11
ƒStart time 11:30am
ƒStop time 1:30pm
ƒRecord speed
SP
∫πMENU to go back
∂ ππADJUST to select
≤¥≥πENTER to enter
∑ ππADJUST to select
2
1
3
5
4
6
8
7
9
0
QUICK PROGRAM
VCR Plus+
¬VCR Plus+ system
Use number keys to enter
the PlusCode number
--------
or press ENTER to program.
Press MENU to go back.
¬Program to record
CH DAY ON OFF
§ 2 WE13 11:30am 1:30pm SP
10 TH14 9:00pm 10:00pm EP
7 E-WE 8:00am 9:00am EP
12 FR15 5:30pm 5:45pm EP
8 TU19 11:00pm 0:30am SP
13 M-F 7:00pm 7:15pm EP
15 SU31 8:00pm 9:00pm EP
46 SU17 7:00am 9:00am SP
Recap screen