Mitsubishi hs-u448 用户手册
31
R
OUT
AUDIO
L
R
VIDEO
OUT
L
R
L
HS-U448
RECORDING
PLAYBACK
AUDIO OUT L
AUDIO OUT R
AUDIO IN R
AUDIO IN L
VIDEO IN
VIDEO OUT
Using the HS-U448 to playback to another VCR
1
Connect one stereo audio cable to AUDIO
IN L and R on the recording VCR, and to
AUDIO OUT L and R on the HS-U448.
IN L and R on the recording VCR, and to
AUDIO OUT L and R on the HS-U448.
2
Connect a yellow video cable to VIDEO IN
on the recording VCR and to VIDEO OUT
on the HS-U448.
on the recording VCR and to VIDEO OUT
on the HS-U448.
3
Set the audio monitor on the HS-U448 to
Stereo. If the other VCR is a mono VCR,
set the audio monitor on the HS-U448 to
Mono. See Selecting and adjusting the
audio and video functions on page 23.
Stereo. If the other VCR is a mono VCR,
set the audio monitor on the HS-U448 to
Mono. See Selecting and adjusting the
audio and video functions on page 23.
4
Set the input of the recording VCR to
External.
External.
5
Put a blank tape into the recording VCR.
6
Put the tape you want to copy into the
HS-U448 and find the cue point.
HS-U448 and find the cue point.
7
On the recording VCR, press REC, then
PAUSE.
PAUSE.
8
On the HS-U448, press PLAY, then PAUSE.
9
Press the PAUSE buttons on both VCRs at
the same time to begin copying the tape.
the same time to begin copying the tape.
10 Press STOP on both VCRs when you are
finished.
Editing Features