Digital Foci imt-063 用户指南

 

 

User’s Guide

 

 

 

Page 25 

 

Version 1.0.1-R0 

 

 

To set Clock Display setting: 

The Clock Display setting will determine whether to show the time or time 
and date information on the screen during the slideshow.   

You can choose among the following options:   

•  Time Only: Displays Time on the bottom right-hand corner of the 

screen while playing the slideshow.     

•  Time and Date: Displays both Time and Date on the bottom 

right-hand corner of the screen while playing the slideshow. 

•  Hide: Does not display either Time or Date while playing the 

slideshow. 

3.2.2.  Setting Schedule On/Off Timer 

Before setting the Schedule On/Off timer, make sure that the system 
clock is set to the correct time and date. (See Section 3.2.1 Setting System 
Time.) 

To access Schedule On/Off Timer:  

1.  From the Setup screen, press UP/DOWN until Clock Setting is 

highlighted. 

2.  Press RIGHT to move the cursor to DateTime. 

3.  Press DOWN to move the cursor to Schedule, and press RIGHT again 

to enter Schedule. 

You can set three different schedules on Image Moments. 

To set Schedule On/Off Timer:  

 

Navigate to one of the three available Schedules and press ENTER. The 
selection will change to a white highlight, indicating that you can change 
the value. Press UP/DOWN (or – /+) to change the value, and press 
LEFT/RIGHT to navigate between each field.   

1.  Enable: Select ON to make the schedule active. Select OFF to make 

the schedule inactive.   

2.  On Time: Set the desired time that the device will turn on.   

3.  Off Time: Set the desired time that the device will turn off. 

4.  Mode: Select Once to have the schedule activate only once and then 

automatically become inactive. Select EveryDay to have the schedule 
activate everyday and remain active.