Quantum lto 4 用户指南
Chapter 5 Specifications
Power Specifications
LTO-4 Half-Height Tape Drive User’s Guide
34
Power Specifications
The tabletop LTO-4 Half-Height Tape Drive has a built-in 90-260 VAC
(47-63 Hz) automatic switching power supply.
Maximum voltage and power specifications for the internal LTO-4 Half-
Maximum voltage and power specifications for the internal LTO-4 Half-
Height Tape Drive is listed in
. Specifications are the same as those
for other SCSI drives unless otherwise noted.
Table 4 Voltage and Current
Specifications
Specifications
Table 5 Power Dissipation
Specification
+12 VDC
+5 VDC
DC Voltage Tolerance
12.00 ± 10%
5.00 ± 5%
Non-operating max
voltage
14 Volts peak
7 Volts peak
Max operating current
Continuous:
Continuous:
Peak:
0.8 amps RMS
2.3 amps RMS
(1 sec max)
4.1 amps max RMS*
4.1 amps max RMS*
Standby current (max)
0.45 amps RMS
1.50 amps RMS*
Ripple (peak-to-peak)
< 100 mV
< 100 mV
* RMS parameters measured at the power connector using a true RMS
digital meter.
Power Specification
Dissipation
Max Standby Power
12.5 watts RMS*
Max Continuous Operating Power
31 watts RMS*