Quantum vls 4mm 用户指南

 

5

The 4mm VLS uses 4mm DDS data cassettes. Before inserting the cassette into the
magazine check the position of the write-protect switch. Set all switches to the enabled
position – hole closed (refer to Figure 2). (The write-protect switch enables or disables
the ability to write [or delete] files on the data cassette.)

Only cassettes labeled "DDS" should be used. Never use audio DAT
cassettes, because the media is not certified. Also, DAT cassettes have
a different mechanical specification which can cause them to jam in
the mechanism.

❐  To write-protect the data cassette, move the write-protect switch away from the

edge of the data cassette, as shown in Figure 2. If the hole is open, the cassette is
write protected and cannot be written to (or erased).

❐  To write-enable the data cassette, move the write-protect switch toward the edge

of the data cassette, as shown. If the hole is closed, the data cassette is write
enabled and can be written to or erased. Use a ball-point pen or similar instrument
to set the write-protect switch.

W rite -P ro te c t
S w itch

O pen

(P rotected)

Closed

(U nprotected)

Figure 2. 4mm Cassette Showing Write-Protect Switch