Toyotomi om-180 安装指导
UNPACKING
1.
Unpack the unit carefully.
2.
Check to see if there are any loose screws that may have occurred in transit.
3.
Take accessories and the instruction manual out of the carton.
STANDARD INSTALLATION PARTS
The following standard installation kits are available:
• Outside venting
Use Flue Pipe Installation Kit (Part# 20476440)
• Chimney Venting;
Use chimney Installation Adapter Kit (Part# 20476430)
For alternate installation methods, you may need to purchase additional accessories which are available
from your dealer.
from your dealer.
ACCESSORY PARTS (OPTION)
Self tapping
screw(5pcs.)
Screw
(4pcs.)
Pipe fixing bracket (4pcs.)
Extension pipe "A" (2pcs.)
Extension pipe "B" (2pcs.)
Nut
(4pcs.)
Aluminum tape
(2pcs.)
Bent joint (2pcs.)
(Part#20476461) EA.
ø2-3/4"
(ø70mm)
31-3/4"~57" (805~1450mm)
ø2-13/16"
(ø71mm)
ø2-13/16"
(ø71mm)
ø2-3/4"
(ø70mm)
5-7/8"
(150mm)
5-7/8"
(150mm)
Insulating cloth cover
(2pcs.)
(Part#20476455) EA.
33-1/2"(850mm)
(Part#20476491) EA.
EXTENSION PIPE KIT
(Part#20476496)
(Part#20476496)
EXTENSION FLUE PIPE
(Part#20476486)
9-1/2”(240mm)
NOTE:
This extension flue
pipe is for use in wall
thickness from 10-
5/8 in. (270mm) to
18-1/8 in. (460mm).
This extension flue
pipe is for use in wall
thickness from 10-
5/8 in. (270mm) to
18-1/8 in. (460mm).
2
SECTION B:
UNPACKING
Inner flange
(Part#20476468)
Inner flue pipe (1pc.)
(Part#20476401)
Flexible bent joint (1pc.)
(Part#20476492)
Flexible
exhaust
pipe (1pc.)
Outer flue pipe (1pc.)
13-3/4"(350mm)
Aluminum tape
(w:30mm
×500mm)
(1pc.)
Insulating
cloth cover
(Part#20476455)
Rubber joint
(2pcs.)
(Part#20476475 EA.)
Flange gasket
(t:5mm)(2pcs.)
(Part#20476471) EA.
Inlet hose
ø3"(ø75mm)
(Part#20476451)
33-1/2"(850mm)
Nut
(2pcs.)
Screw
(2pcs.)
Self tapping screw
for concrete
(8pcs.)
Self tapping screw
(8pcs.)
Hose band
(2pcs.)
(Part#20476477) EA.
39-3/8"(1000mm)
9-7/8"
(250mm)
10-1/2"
(266mm)
Outer flange
(Part#20476469)
ø3-15/16"
(ø100mm)
ø2-13/16"
(ø71mm)
ø2-3/4"
(ø70mm)
INTAKE PIPE TOP
EXHAUST PIPE
ADAPTER
CHIMNEY INSTALLATION
ADAPTER KIT
(Part#20476430 - Dia. 5")
FLUE PIPE INSTALLATION KIT
(Part#20476440)
(Part#20476440)
or
CAUTION: Total length of the
extension
pipe
between the water
heater and the flue
pipe must be no
greater than 10ft.
with a total of three
bends.
NOTE:
When using exten-
sion pipes always
cover the exhaust
pipe with the insulat-
ing cloth cover.
K
Coupler
(2pcs.)
Lead wire for
circulation pump
(1pc.)
Temperature and
pressure relief valve
(1pc.)
Reducer
(1pc.)
included with the unit