Sony STR-DA3400ES 用户指南

US

D:\Cannes\STR-DA3400ES_U_R1\3289137121\3289137121\3289137121\01US-
STRDA3400ESUC\090OTH.fm

STR-DA3400ES
3-289-137-12(1)

You can also use INPUT SELECTOR on 
the receiver.

For example, insert the video tape you 
want to copy into the VCR.

Insert a blank video tape, etc., into the 
recording component (VIDEO 1) for 
recording.

• Some sources contain copy guards to prevent 

recording. In this case, you may not be able to 
record from the sources.

• The audio input signals from the MULTI 

CHANNEL INPUT jacks are not output.

• Only analog input signals are output from the 

analog output jack (for recording).

• Only digital input signals are output from the 

digital output jack (for recording).

• HDMI sound cannot be recorded.

You can enjoy images and sounds from a 
component connected to the receiver in a zone 
(zone 2) other than the main zone. For 
example, you can watch the DVD in the main 
zone and listen to the CD in zone 2.
When using an IR repeater (not supplied), you 
can also operate both components in the main 
zone and Sony receiver in zone 2 from zone 2.

• Switching the output source for the ZONE 2 

OUT jacks.

• Switching the Sony receiver’s power on or 

off in zone 2.

The following operations are described for 
connecting an IR repeater and operating the 
receiver in zone 2. When an IR repeater is not 
connected, use this receiver in the main zone.

You can operate the receiver without pointing 
the remote toward the IR repeater of the 
receiver if you connect an IR repeater (not 
supplied) to the IR REMOTE jack.
Use an IR repeater when you install the 
receiver in a place where signals from the 
remote cannot reach.

IR repeater 

(not supplied)

STR-DA3400ES

RM-AAL017