Sony STR-DA3400ES 用户指南

US

D:\Cannes\STR-DA3400ES_U_R1\3289137121\3289137121\3289137121\01US-
STRDA3400ESUC\090OTH.fm

STR-DA3400ES
3-289-137-12(1)

V/v to select, 

V/v/B/b repeatedly to 

x Power

Lets you turn zone operation on.
• Zone2-ON
• Zone2-OFF

x Input

Lets you select the source that is output to the 
zone. You can output audio and video signals 
to zone 2.

x Volume

You can adjust the volume in the main zone. If 
“Sur Back Assign” is set to “ZONE 2” in the 
Speaker setting menu, you can also adjust the 
zone 2 volume.

x 12V Trigger

You can turn the receiver on/off in another 
zone, or select various options for use of the 
12V Trigger function, as explained below.
• OFF

Lets you turn off output of 12V triggers even 
when the main receiver is turned on.

• CTRL

Lets you turn the output of 12V triggers on 
or off manually using the CIS command of 
the IR remote.

• ZONE

Lets you turn the output of 12V triggers on 
or off based on whether the selected zone is 
turned on or off.

• INPUT (for “Main” only)

Lets you turn on the output of 12V triggers 
when the preset input is selected.
When you select “Input”, the setting display 
which sets each input trigger to on/off 
appears. Press 

V/v to select the input, then 

press 

 to check the box.

• Even when this receiver is in standby mode (press 

?/1 on the remote to turned off this receiver), the 
receiver in zone 2 remains turned on. To turn off all 
receivers, press ?/1 and AV ?/1 on the RM-
AAL017 remote at the same time (SYSTEM 
STANDBY).

• Only signals from components connected to the 

analog input jacks are output through the ZONE 2 
OUT jacks. No signals are output from 
components connected to only the digital input 
jacks.

• When SOURCE is selected, the signals input to the 

MULTI CHANNEL INPUT jacks are not output 
from the ZONE 2 OUT jacks even when the multi 
channel input is selected. The analog audio signals 
of the current function are output.

• When “Tuner” is selected; the same type of radio 

station (FM/AM) selected in the main zone is set in 
zone 2. However, you can select the input other 
than “Tuner” in zone 2.                 

• When the receiver in the main zone is turned off, or 

an input source other than “Tuner” is selected, you 
can select a radio station from AM or FM in zone 2.
When two of the receivers in the main zone, zone 2 
are turned off, you can select a broadcast from FM/
AM/XM/SIRIUS in one zone in which the receiver 
is turned on.