Sony STR-DA3400ES 用户指南

US

D:\Cannes\STR-DA3400ES_U_R1\3289137121\3289137121\3289137121\01US-
STRDA3400ESUC\030CON.fm

STR-DA3400ES
3-289-137-12(1)

a)

See the table on page 121 for information on the 
buttons that you can use to control each 
component.

b)

The TV/5, N /CATEGORY MODE and PRESET 
+/TV CH+ buttons have tactile dots. Use the tactile 
dots as references when operating the receiver.

• Some functions explained in this section may not 

work depending on the model.

• The above explanation is intended to serve as an 

example only. Therefore, depending on the 
component, the above operation may not be 
possible or may operate differently than described.

O F1/F2

Press to select a component to 
operate.
• HDD/DISC combo

F1: HDD
F2: DVD, Blu-ray disc

• DVD/VHS combo

F1: DVD, Blu-ray disc
F2: VHS

P BD/DVD 

Press to display the menu of the 
DVD or Blu-ray disc on the TV 
screen. Then, use 

V/v/B/b and 

 to perform menu operations 

Press MACRO 1 or MACRO 2 
to set up the macro function 
(page 126).

Q MASTER 

Press to adjust the volume level 
of all speakers at the same time.

Press TV (Z), then press TV 
VOL +/– to adjust the volume 
level of the TV.

R MUTING

Press to turn off the sound 
temporarily. Press MUTING 
again to restore the sound.
Press TV (Z), then press 
MUTING to activate the TV’s 
muting function.

S DISC SKIP

Press to skip a disc when using 
a multi-disc changer.

T RETURN/

EXIT O

Press to return to the previous 
menu or exit the menu while the 
menu or on-screen guide of the 
VCR, DVD player, etc. is 
displayed on the TV screen.
Press TV (Z), then press 
RETURN/EXIT O to return to 
the previous menu or exit the 
TV’s menu while the menu is 
displayed on the TV screen.

U DISPLAY

Press to select information 
displayed in the display 
window, TV screen of the VCR, 
satellite tuner, etc.
Press TV (Z), then press 
DISPLAY to display TV’s 
information on the TV screen.

V INPUT 

Press to select the input mode 
when the same components are 
connected to both digital and 
analog jacks (page 94).

W RESOLUTION Press repeatedly to change the 

resolution of signals output 
from the HDMI OUT or 
COMPONENT VIDEO 
MONITOR OUT jack 
(page 90).

X 2CH/

Press to select a sound field 
(page 116) or to switch the 
audio of the selected input to 
analog signal without any 
adjustment (page 116).

Y SHIFT

Press to light up the button to 
activate the buttons with pink 
printing.

Z TV

Press to light up the button to 
enable the TV operation 
(buttons with yellow printing).

wj THEATER

Press to enjoy optimal image 
suited for movies and to output 
the sound from the speakers 
connected to this receiver 
automatically.
Note
This button will only function if 
your TV is compatible with 
Theater Mode. 
Refer to the operating 
instructions supplied with the 
TV for details.

wk RM SET UP

Press to set up the remote.