Sony STR-DA3400ES 用户指南
136
US
D:\Cannes\STR-DA3400ES_U_R1\3289137121\3289137121\3289137121\01US-
STRDA3400ESUC\110ADD.fm
STRDA3400ESUC\110ADD.fm
masterpage: Left
STR-DA3400ES
3-289-137-12(1)
3-289-137-12(1)
Video
There is no picture or an unclear
picture appears on the TV screen.
picture appears on the TV screen.
• Select the appropriate input on the receiver
• Set your TV to the appropriate input mode.
• Move your audio components away from
• Move your audio components away from
the TV.
• Assign the video input correctly.
• The input signal should be same as input
• The input signal should be same as input
when you are up-converting an input
signal with this receiver (page 33).
signal with this receiver (page 33).
The image of the COMPONENT VIDEO
OUT is corrupted.
OUT is corrupted.
• Video input signals other than 480p
component are not received when signals
are output from the VIDEO jack. Input
480i component video signals.
are output from the VIDEO jack. Input
480i component video signals.
• When component input signals other than
480p are output, use the COMPONENT
VIDEO MONITOR OUT jack and set
“Resolution” to “DIRECT”.
VIDEO MONITOR OUT jack and set
“Resolution” to “DIRECT”.
Recording cannot be carried out.
• Check that the components are connected
correctly (page 25).
• Select the source component using INPUT
SELECTOR (page 50).
The GUI does not appear on the TV
screen.
screen.
• Press GUI MODE repeatedly to select
“GUI ON”. Press MENU if the GUI menu
does not appear on the TVscreen.
does not appear on the TVscreen.
• Check that the TV is connected correctly.
HDMI
The source sound input to the HDMI
jack is not output from the receiver or
the TV speaker.
jack is not output from the receiver or
the TV speaker.
• Check the HDMI connection (page 86).
• You cannot listen to the Super Audio CD
• You cannot listen to the Super Audio CD
by connecting HDMI.
• Depending on the playback component,
you may need to set up the component.
Refer to the operating instructions
supplied with each component.
Refer to the operating instructions
supplied with each component.
• Be sure to use a connecting cable for the
HDMI jack corresponding to high speed
(an HDMI version 1.3a, category 2 cable)
when you view images or listen to sound
during a Deep Color (Deep Colour)
transmission.
(an HDMI version 1.3a, category 2 cable)
when you view images or listen to sound
during a Deep Color (Deep Colour)
transmission.
The source image input to the HDMI
jack is not output from the TV.
jack is not output from the TV.
• Check the HDMI connection (page 86).
• Depending on the playback component,
• Depending on the playback component,
you may need to set up the component.
Refer to the operating instructions
supplied with each component.
Refer to the operating instructions
supplied with each component.
• Be sure to use a connecting cable for the
HDMI jack corresponding to high speed
(an HDMI version 1.3a, category 2 cable)
when you view images or listen to sound
during a Deep Color (Deep Colour)
transmission.
(an HDMI version 1.3a, category 2 cable)
when you view images or listen to sound
during a Deep Color (Deep Colour)
transmission.
The Control for HDMI function does not
work.
work.
• Check the HDMI connection (page 86).
• Make sure “Control for HDMI” is set to
• Make sure “Control for HDMI” is set to
“ON” in the HDMI settings menu.
• Make sure the connected component is
compatible with the Control for HDMI
function.
function.
• Check the Control for HDMI settings on
the connected component. Refer to the
operating instructions of the connected
component.
operating instructions of the connected
component.
• Repeat the procedures of “Preparing
Control for HDMI function” if you change
the HDMI connection, connect/disconnect
the AC power cord (mains lead), or when
there is a power failure (page 87).
the HDMI connection, connect/disconnect
the AC power cord (mains lead), or when
there is a power failure (page 87).