Sony STR-DA3400ES 用户指南

下载
页码 144
139
US
D:\Cannes\STR-DA3400ES_U_R1\3289137121\3289137121\3289137121\01US-
STRDA3400ESUC\110ADD.fm
masterpage: Right
STR-DA3400ES
3-289-137-12(1)
Ad
ditional Inf
o
rmation
Specifications
AUDIO POWER 
SPECIFICATIONS
POWER OUTPUT AND TOTAL 
HARMONIC DISTORTION:
With 8 ohms loads, both channels driven, from 
20 Hz – 20,000 Hz; rated 100 watts per 
channel minimum RMS power, with no more 
than 0.09% total harmonic distortion from 250 
milliwatts to rated output.
Amplifier section
Power Output
Rated Power Output at Stereo Mode
1)
(8 ohms 20 Hz – 20 kHz, THD 0.09%):
100 W + 100 W
Reference Power Output at Stereo Mode 
(4 ohms 20 Hz – 20 kHz, THD 0.15%):
85 W + 85 W
Reference Power Output (8 ohms 1 kHz, THD 
0.7%)
FRONT
2)
:
110 W + 110 W
CENTER
2)
:
110 W
SURROUND
2)
:
110 W + 110 W
SURROUND BACK
2)
:
110 W + 110 W
Reference Power Output (4 ohms 1 kHz, THD 
0.7%)
FRONT
2)
:
100 W + 100 W
CENTER
2)
:
100 W
SURROUND
2)
:
100 W + 100 W
SURROUND BACK
2)
:
100 W + 100 W
1)
Depending on the sound field settings and the 
source, there may be no sound output.
2)
Measured under the following conditions:
Power requirements: 120 V AC, 60 Hz
Frequency response
PHONO
RIAA equalization curve 
±0.5 dB
Analog
10 Hz – 100 kHz, 
±3 dB (with sound field 
and equalizer bypassed)
Input
PHONO
Sensitivity: 2.5 mV
Impedance: 50 kohms
S/N
3)
: 90 dB 
(A, 20 kHz LPF)
4)
Analog
Sensitivity: 150 mV/ 
50 kohms 
S/N
3)
: 100 dB 
(A, 20 kHz LPF)
4)
Digital (Coaxial) Impedance: 75 ohms 
S/N: 96 dB 
(A, 20 kHz LPF)
4)
Digital (Optical)
S/N: 96 dB 
(A, 20 kHz LPF)
4)
Output (analog)
AUDIO OUT
Voltage: 150 mV/
1 kohm
SUBWOOFER
Voltage: 2 V/1 kohm
Equalizer
Gain levels
±10 dB, 1 dB step
3)
INPUT SHORT (with sound field and equalizer 
bypassed).
4)
Weighted network. 
FM tuner section
Tuning range
87.5 – 108.0 MHz
Antenna (aerial)
FM wire antenna (aerial)
Antenna (aerial) terminals
75 ohms, unbalanced
Intermediate frequency
10.7 MHz
AM tuner section
Tuning range
With 10-kHz tuning scale
530 – 1,710 kHz
5)
With 9-kHz tuning scale
531 – 1,710 kHz
5)
Antenna (aerial)
Loop antenna (aerial)
Intermediate frequency
450 kHz
5)
You can change the AM tuning scale to either 9 
kHz or 10 kHz. After tuning in any AM station, 
turn off the receiver. While holding down 
TUNING MODE, press POWER on the receiver. 
All preset stations will be erased when you change 
the tuning scale. To reset the scale to 10 kHz (or 9 
kHz), repeat the procedure.
continued