Sony STR-DA3400ES 用户指南

下载
页码 144
68
US
D:\Cannes\STR-DA3400ES_U_R1\3289137121\3289137121\3289137121\01US-
STRDA3400ESUC\070SET.fm
masterpage: Left
STR-DA3400ES
3-289-137-12(1)
5
Press 
V/v repeatedly to select 
the speaker pattern you want.
1
Press GUI MODE repeatedly to 
select “GUI ON”.
“GUI MODE” appears in the display 
window of the receiver and the GUI menu 
appears on the TV screen. Press MENU if 
the GUI menu does not appear on the TV 
screen.
2
Press 
V/v repeatedly to select 
“Settings”, then press 
 or 
b.
The Settings menu list appears on the TV 
screen.
3
Press 
V/v repeatedly to select 
“Speaker”, then press 
 or 
b.
4
Press 
V/v repeatedly to select 
“Test Tone”, then press 
.
5
Press 
B/b repeatedly to select 
test tone type, then press 
.
6
Press 
V/v repeatedly to select 
the speaker you want to adjust, 
then press 
.
The test tone is output from each speaker 
in sequence.
7
Press 
V/v repeatedly to adjust 
the parameter, then press 
.
Tips
• To adjust the level of all speakers at the same 
time, press MASTER VOL +/–.
• The adjusted value is shown on the display 
during adjustment.
When a test tone is not output 
from the speakers
• The speaker cords may not be connected 
securely. Check to see if they are connected 
securely and cannot be disconnected by 
pulling on them slightly.
• The speaker cords may have the short-circuit 
problem.
When a test tone is output from 
a different speaker than the 
speaker displayed on the 
screen
The speaker pattern to the connected speaker 
is not set up correctly. Make sure the speaker 
connection and the speaker pattern match.
Making settings with the Test 
Tone menu
CATEGORY MODE
TUNING
DISC SKIP
TUNING
CATEGORY
MODE
GUI
MODE
SLEEP
NIGHT
MODE
RESOLUTION
HOME
INPUT
1
2-7
MENU