Sony STR-DA3400ES 快速安装指南

D:\NORM'S JOB\SONY HA\STR-DA3400ES\CEL\3289137411\01GB-
STRDA3400ESUC\030CON_GB.fm

STR-DA3400ES
3-289-137-41(1)

• When video signals from a VCR, etc., are 

converted on this receiver and then output to 
your TV, depending on the status of the 
video signal output, the image on the TV 
screen may appear distorted horizontally or 
no image may be output.

• HDMI video signals cannot be converted to 

component video signals and video signals.

• The converted video signals are output only 

from the MONITOR OUT jacks. They are 
not output from the VIDEO OUT jacks.

• When you play a VCR with an image 

improvement circuit, such as Time Base 
Corrector (TBC), the images may be 
distorted or may not be output. In this case, 
set the image improvement circuit function 
to off.

• The resolution of the signals output to the 

COMPONENT VIDEO MONITOR OUT 
jacks is converted up to 1080i. The 
resolution of the signals output to the HDMI 
OUT jack is converted up to 1080p.

• COMPONENT VIDEO MONITOR OUT 

jacks have restrictions on resolution when 
the resolution of video signals protected by 
copyright technology is converted. 
Resolution of up to 480p can be output to the 
COMPONENT VIDEO MONITOR OUT 
jacks. The HDMI OUT jack has no 
restriction on resolution.

• Video signals for which the resolution has 

been converted can be output from either the 
COMPONENT VIDEO MONITOR OUT 
jacks or the HDMI OUT jack. The video 
signals are output from the HDMI OUT jack 
when both are connected.

• Set “Resolution” to “AUTO” or “480i/576i” 

in the Video settings menu to output the 
video signals from the MONITOR VIDEO 
OUT or COMPONENT VIDEO MONITOR 
OUT jack when both are connected.

Set “Resolution” to “DIRECT” in the Video 
settings menu when receiving a signal that 
supports Closed Captions.
Use the same kind of cords for the input/output 
signals.