Sony STR-DA3400ES 快速安装指南

D:\NORM'S JOB\SONY HA\STR-DA3400ES\CEL\3289137411\01GB-
STRDA3400ESUC\070SET_GB.fm

STR-DA3400ES
3-289-137-41(1)

When one of the sound fields for music is selected, 
no sound is output from the subwoofer if all the 
speakers are set to “LARGE”. However, the sound 
will be output from the subwoofer if the digital input 
signal contains LFE signals, or if the front or 
surround speakers are set to “SMALL”, the sound 
field for movie is selected, or “Portable Audio” is 
selected.

• The “LARGE” and “SMALL” settings for each 

speaker determine whether the internal sound 
processor will cut the bass signal from that 
channel.
When the bass is cut from a channel, the bass 
redirection circuitry sends the corresponding bass 
frequencies to the subwoofer or other “LARGE” 
speakers.
However, since bass sound has a certain amount of 
directionality, it is best not to cut it, if possible. 
Therefore, even when using small speakers, you 
can set them to “LARGE” if you want to output the 
bass frequencies from that speaker. On the other 
hand, if you are using a large speaker, but prefer not 
to have bass frequencies output from that speaker, 
set it to “SMALL”.
If the overall sound level is lower than you prefer, 
set all speakers to “LARGE”. If there is not enough 
bass, you can use the equalizer to boost the bass 
levels.

• The surround back speakers will be set to the same 

setting as that of the surround speakers.

• When the front speakers are set to “SMALL”, the 

center, surround, and surround back speakers are 
also automatically set to “SMALL”.

• If you do not use the subwoofer, the front speakers 

are automatically set to “LARGE”.

“GUI MODE” appears in the display 
window of the receiver and the GUI menu 
appears on the TV screen. Press MENU if 
the GUI menu does not appear on the TV 
screen.

V/v repeatedly to select 

b.

The Settings menu list appears on the TV 
screen.

V/v repeatedly to select 

b.

V/v repeatedly to select 

Select “Speaker Pattern” according to the 
speaker system which you are using. You 
do not need to select the speaker pattern 
after Auto Calibration.

MENU