Sony STR-DA3400ES 快速安装指南

D:\NORM'S JOB\SONY HA\STR-DA3400ES\CEL\3289137411\01GB-
STRDA3400ESUC\090OTH_GB.fm

STR-DA3400ES
3-289-137-41(1)

I SP A/SP B/

Lights up according to the 
speaker system used (page 42). 
However, these indicators do 
not light up if the speaker 
output is turned off or if 
headphones are connected.

J SLEEP

Lights up when the sleep timer 
is activated.

K A.DIRECT

Lights up when the receiver is 
processing Analog Direct 
signals.

L Tuner 

Lights up when using the 
receiver to tune in radio 
stations, etc.

M MEM

Lights up when a memory 
function, such as Preset 
Memory, etc., is activated.

N ; PL/

; PL II/
; PL IIx

“; PL” lights up when the 
receiver applies Dolby Pro 
Logic processing to 2 channel 
signals in order to output the 
center and surround channel 
signals.
“; PL II” lights up when the 
Dolby Pro Logic II decoder is 
activated.
“; PL IIx” lights up when the
Dolby Pro Logic IIx decoder is 
activated.
However, these indicators do 
not light up if there are no 
center and surround speakers 
and you select a sound field 
using the A.F.D. button.

O BI-AMP

Lights up when “Sur Back 
Assign” is set to “BI-AMP”.

P EQ

Lights up when the equalizer is 
activated.

Q NEO:6

Lights up when DTS Neo:6
Cinema/Music decoder is
activated.

R DTS-HD 

“DTS-HD MSTR” lights up 
when the receiver is decoding 
DTS-HD Master Audio 
signals. 
“DTS-HD HI RES” lights up 
when the receiver is decoding 
DTS-HD High Resolution 
signals.

S LPCM

Lights up when Linear PCM 
signals are detected.

T ANALOG

Lights up when 
– INPUT MODE is set to 

“AUTO” and no digital signal 
is being input through the 
COAXIAL, OPTICAL or 
HDMI jacks.

– INPUT MODE is set to 

“ANALOG”.

– the “2ch Analog Direct” is 

being used.

U DMPORT

Lights up when DIGITAL 
MEDIA PORT adapter is 
connected and “DMPORT” is 
selected.

V MULTI IN

Lights up when multi channel 
input is selected.

W HDMI

Lights up when the receiver 
recognizes a component 
connected via an HDMI IN 
jack.

X Playback

The letters (L, C, R, etc.) 
indicate the channels being 
played back. The boxes around 
the letters vary to show how the 
receiver downmixes the source 
sound (based on the speaker 
settings).
Front Left
Front Right
Center (monaural)
Surround Left
Surround Right
Surround (monaural or the 
surround components obtained 
by Pro Logic processing)
Surround Back Left
Surround Back Right
Surround Back (the surround
back components obtained by
6.1 channel decoding)
Example:
Recording format (Front/
Surround): 3/2.1
When Speaker Pattern is set to 
“3/0.1” (page 96)
Sound Field: A.F.D. AUTO