Sony STR-DA3400ES 快速安装指南

D:\NORM'S JOB\SONY HA\STR-DA3400ES\CEL\3289137411\01GB-
STRDA3400ESUC\090OTH_GB.fm

masterpage: Right

STR-DA3400ES
3-289-137-41(1)

Oth

r Op

eratio

Using a bi-amplifier
connection

If you are not using the surround back
speakers, you can use the SPEAKERS
SURROUND BACK terminals for the front
speakers in a bi-amplifier connection.

To connect the speakers

Connect the jacks on the Lo (or Hi) side of the
front speakers to the SPEAKERS FRONT A
terminals, and connect the jacks on the Hi (or
Lo) side of the front speakers to the
SPEAKERS SURROUND BACK terminals.
Make sure that the metal fittings of Hi/Lo
attached to the speakers have been removed
from the speakers. Otherwise, it may cause the
receiver to malfunction.

To set up the speakers

Set “Sur Back Assign” to “BI-AMP” in the
Speaker settings menu. The same signals
output from the SPEAKERS FRONT A
terminals can be output from the SPEAKERS
SURROUND BACK terminals by setting “Sur
Back Assign” to “BI-AMP”.

Notes

• You cannot use the SPEAKERS FRONT B

terminals for a bi-amplifier connection.

• Set “Sur Back Assign” to “BI-AMP” before you

perform Auto Calibration.

• If you set “Sur Back Assign” to “BI-AMP”, the

speaker level, balance, and equalizer settings of the
surround back speakers become invalid, and those
of the front speakers are used.

• Signals output from the PRE OUT jacks are used

with the same settings as those of the SPEAKERS
terminals.

• If you set “Speaker Pattern” to a setting with

surround back speakers, you cannot set “Sur Back
Assign” to “BI-AMP”.

Front speaker

(R)

Front speaker

(L)