Sony STR-DA7100ES 操作指南
115
GB
E:\STR-DA7100ES\2320745143\2320745143STRDA7100ESUC\01GB-
STRDA7100ESUC\080REM.fm
STRDA7100ESUC\080REM.fm
masterpage: Right
STR-DA7100ES
2-320-745-14 (3)
Using the Rem
o
te
Performing several
commands in sequence
automatically
commands in sequence
automatically
(Macro Play)
The Macro Play function lets you link several
IR codes in a sequential order as a single
command.
For example, after putting on a light of the
room and turning on an air-conditioner then,
the receiver plays a number of CDs in a series.
The remote provides 2 macro lists (MACRO1
and MACRO2). You can specify up to 16 IR
codes for each macro list.
IR codes in a sequential order as a single
command.
For example, after putting on a light of the
room and turning on an air-conditioner then,
the receiver plays a number of CDs in a series.
The remote provides 2 macro lists (MACRO1
and MACRO2). You can specify up to 16 IR
codes for each macro list.
1
Press RM SET UP.
The set up list appears.
2
Move the easy scroll key to
select “IR SET,” then press the
key to enter the selection.
select “IR SET,” then press the
key to enter the selection.
The IR SET list appears.
3
Move the easy scroll key to
select “MACRO1” (or
“MACRO2”), then press the key
to enter the selection.
select “MACRO1” (or
“MACRO2”), then press the key
to enter the selection.
The program number list appears.
4
Move the easy scroll key to
select the macro step number
(“1-NO SET,” for example) then
press the key to enter the
selection.
select the macro step number
(“1-NO SET,” for example) then
press the key to enter the
selection.
The category list appears.
5
Move the easy scroll key to
select the component category
(“VCR,” for example), then
press the key to enter the
selection.
select the component category
(“VCR,” for example), then
press the key to enter the
selection.
The maker list appears.
6
Move the easy scroll key to
select the maker, then press the
key to enter the selection.
select the maker, then press the
key to enter the selection.
The function list appears.
7
Move the easy scroll key to
select the IR code for the
operation you want to perform,
then press the key to enter the
selection.
select the IR code for the
operation you want to perform,
then press the key to enter the
selection.
The program number list reappears.
8
Repeat steps 4 through 7 to
program up to 16 IR codes.
program up to 16 IR codes.
When you have finished programming IR
codes, select “Exit” in step 7.
codes, select “Exit” in step 7.
To cancel programming
Move the easy scroll key to select “Exit” or
“Cancel” during any step, then press the key to
enter the selection.
“Cancel” during any step, then press the key to
enter the selection.
Starting macro play
1
Press INPUT SELECTOR.
The input list appears.
The input list appears.
2
Move the easy scroll key to select
“MACRO1” or “MACRO2,” then press
the key to enter the selection.
The IR codes appear on the display window
as they are performed.
“MACRO1” or “MACRO2,” then press
the key to enter the selection.
The IR codes appear on the display window
as they are performed.
Program the sequence of the
operation
operation
1
2,3,
4,5,
6,7
2,3,
4,5,
6,7
continued