Sony STR-DA7100ES 操作指南

E:\STR-DA7100ES\2320745143\2320745143STRDA7100ESUC\01GB-
STRDA7100ESUC\090ADD.fm

STR-DA7100ES

2-320-745-14 (3)

The power section is overheated. Check that 
the ventilation hole is not covered. Turn off 
the receiver, leave the receiver for a while, 
and turn on the power again.

Turn off the receiver, check the central core 
of a speaker cord is not touching the receiver 
or other speakers, and turn on again.

Turn off the receiver and consult your 
nearest Sony dealer.

The receiver cannot output the sound due to 
the copyright protection.

The receiver is not compatible with the 
format of the input signal.

Since the i.LINK bus is busy with other 
connected component’s output signals, 
audio signals cannot be connected.
• Stop sending output signals from 

connected components (Turn off the 
component or press the STOP button, 
etc.). Press i.LINK on the receiver, then 
select the player again.

• i.LINK connection is caught in a loop.
• Check the connection (page 29).

POWER OUTPUT AND TOTAL 
HARMONIC DISTORTION:
(Models of area code UC only)
With 8 ohm loads, both channels driven, from 
20 – 20,000 Hz; rated 170 watts per channel 
minimum RMS power, with no more than 
0.15% total harmonic distortion from 250 
milliwatts to rated output.

Models of area code UC, TW:
POWER OUTPUT
Rated Power Output at Stereo Mode

1)

(8 ohms 20 Hz – 20 kHz, 
THD 0.15%):
170 W + 170 W

Reference Power Output at Stereo Mode

(4 ohms 20 Hz – 20 kHz, 
THD 0.15%):
170 W + 170 W

Reference Power Output

(8 ohms 20 Hz – 20 kHz, 
THD 0.15%)
FRONT

2)

: 170 W + 170 W

CENTER

2)

: 170 W

SURR

2)

: 170 W + 170 W

SURR BACK

2)

: 170 W + 

170 W

Reference Power Output

(4 ohms 20 Hz – 20 kHz, 
THD 0.15%)
FRONT

2)

: 170 W + 170 W

CENTER

2)

: 170 W

SURR

2)

: 170 W + 170 W

SURR BACK

2)

: 170 W + 

170 W

Models of area code CEL, KR, CN:
POWER OUTPUT
Rated Power Output in Stereo Mode

1) 2)

(8 ohms 1 kHz, THD 
0.7%):
170 W + 170 W

All memorized settings

Customized sound fields

page 101