Sony STR-DE898 手册
masterpage:Left
lename[D:\Sony
SEM\Data_DE898_Revision3\J9050152_2580791113DE898U\2580791113\GB03CON_STR-
DE898-U.fm]
DE898-U.fm]
18
GB
model name1[STR-DE898]
[2-580-791-11(3)]
You can use the SPEAKER SET UP menu to set
the size, distance and location of the speakers
connected to this receiver.
the size, distance and location of the speakers
connected to this receiver.
1
Press
?/1
to turn on the receiver.
2
Press MAIN MENU repeatedly to select
“
“
SET UP
”.
3
Press
or
repeatedly to select the
parameter you want to adjust.
Note
Some speaker setup items may appear dimmed in
the display. This means that they have been
adjusted automatically due to other speaker
settings or may not be adjustable.
the display. This means that they have been
adjusted automatically due to other speaker
settings or may not be adjustable.
4
Turn –/+ to select the setting you want.
The setting is entered automatically.
Note
Press ENTER if you select the setting for “SP.
PATTERN X–X”.
PATTERN X–X”.
5
Repeat steps 3 and 4 until you have set
all of the items that follow.
all of the items that follow.
SPEAKER SET UP menu
parameters
parameters
The initial settings are underlined.
x
EASY SET UP XXX (Speaker easy setup)
• YES
If you want to set up your speakers
automatically, select “YES”. You can select a
pre-defined speaker pattern (see the supplied
“Easy Setup Guide”).
automatically, select “YES”. You can select a
pre-defined speaker pattern (see the supplied
“Easy Setup Guide”).
• NO
If you want to adjust the settings of each
speaker manually, select “NO”.
speaker manually, select “NO”.
x
SP. PATTERN X–X
(Speaker setup pattern)
(Speaker setup pattern)
When you select “EASY SET UP YES”, select
the speaker setup pattern. Turn –/+ to select the
speaker setup pattern and press ENTER to enter
the selection. Check your speaker setup pattern
using the supplied “Easy Setup Guide”.
the speaker setup pattern. Turn –/+ to select the
speaker setup pattern and press ENTER to enter
the selection. Check your speaker setup pattern
using the supplied “Easy Setup Guide”.
x
SUB WOOFER XXX
(Sub woofer selection)
(Sub woofer selection)
• YES
If you connect a sub woofer, select “YES”.
• NO
If you did not connect a sub woofer, select
“NO”. The front speakers are automatically
set to “LARGE” and you cannot change this
setting. This activates the bass redirection
circuitry and outputs the LFE signals from
other speakers.
“NO”. The front speakers are automatically
set to “LARGE” and you cannot change this
setting. This activates the bass redirection
circuitry and outputs the LFE signals from
other speakers.
• In order to take full advantage of the Dolby
Digital bass redirection circuitry, we
recommend that you set the cut off frequency
on the sub woofer as high as possible.
recommend that you set the cut off frequency
on the sub woofer as high as possible.
x
FRONT SP XXXXX
(Front speakers size)
(Front speakers size)
• LARGE
If you connect large speakers that will
effectively reproduce bass frequencies, select
“LARGE”. Normally, select “LARGE”.
effectively reproduce bass frequencies, select
“LARGE”. Normally, select “LARGE”.
• SMALL
If the sound is distorted, or you feel a lack of
surround effects when using multi channel
surround sound, select “SMALL” to activate
the bass redirection circuitry and output the
front channel bass frequencies from the sub
woofer. When the front speakers are set to
“SMALL”, the center, surround and surround
back speakers are also automatically set to
“SMALL” (unless previously set to “NO”).
surround effects when using multi channel
surround sound, select “SMALL” to activate
the bass redirection circuitry and output the
front channel bass frequencies from the sub
woofer. When the front speakers are set to
“SMALL”, the center, surround and surround
back speakers are also automatically set to
“SMALL” (unless previously set to “NO”).
5: Setting up the speakers
GB01COV_STR-DE898-U.book Page 18 Tuesday, March 15, 2005 12:20 PM