Sony STR-DE898 手册

下载
页码 64
masterpage:Left
lename[D:\Sony 
SEM\Data_DE898_Revision3\J9050152_2580791113DE898U\2580791113\GB03CON_STR-
DE898-U.fm]
22
GB
 model name1[STR-DE898]
[2-580-791-11(3)]
Adjust the speaker levels and balance while 
listening to the test tone from your listening 
position. Use the remote for the operation.
Tip
The receiver employs a test tone with a frequency 
centered at 800 Hz.
1
Press 
?/1
 to turn on the receiver.
2
Press TEST TONE.
“TEST TONE [XXX]” appears in the 
display and the test tone is output from each 
speaker in sequence.
Front (left) 
t Center t Front (right) t 
Surround (right) 
t Surround back (right)* 
t Surround back (left)* t Surround 
(left) 
t Sub woofer
* You will only hear the test tone from the
– surround back left and right speakers when 
surround back speaker selection is set to 
“DUAL”.
– surround back left speaker when surround 
back speaker selection is set to “SINGLE”.
3
Adjust the speaker levels and balance 
using the LEVEL menu so that the level 
of the test tone sounds the same from 
each speaker.
For details on the LEVEL menu settings, 
see page 37.
Tips
• To adjust the level of all speakers at the same 
time, press MASTER VOL +/– on the remote or 
turn MASTER VOLUME –/+ on the receiver.
• The adjusted value are shown in the display 
during adjustment.
4
Press TEST TONE again after 
adjustment.
The test tone turns off.
Note
Although these adjustments can also be made via the 
front panel using the LEVEL menu (when the test tone 
is output, the receiver switches to the LEVEL menu 
automatically), we recommend you follow the 
procedure described above and adjust the speaker 
levels from your listening position using the remote.
6: Adjusting the speaker 
levels and balance
— TEST TONE
GB01COV_STR-DE898-U.book  Page 22  Tuesday, March 15, 2005  12:20 PM