Sony STR-DE695 用户指南
18
US
STR-DE695 4-247-631-11 (1) US
Multi channel surround setup
(continued)
(continued)
45
°
90
°
20
°
A
A
B
C
C
D
3
Turn the jog dial to select the setting
you want.
you want.
The setting is entered automatically.
4
Repeat steps 2 and 3 until you have set
all of the parameters that follow.
all of the parameters that follow.
Initial settings
Parameter
Initial setting
SW
(SUB WOOFER) S.W. XXX YES
L
R
(FRONT) XXXXX
LARGE
C
(CENTER) XXXXX
LARGE
SL
SR
(SURROUND) XXXXX LARGE
S B
(SURR BACK) XXX
YES
L
R
DIST. XX ft.
10 ft.
C
DIST. XX ft.
10 ft.
SL
SR
DIST. XX ft.
10 ft.
S B
DIST. XX ft.
10 ft.
SL
SR
XXXXXXX
SIDE/LO
x Sub woofer selection (
SW
S.W. XXX)
• If you connect a sub woofer, select “YES”.
• If you do not connect a sub woofer, select
“NO”. This activates the bass redirection
circuitry and outputs the LFE signals from other
speakers.
circuitry and outputs the LFE signals from other
speakers.
• In order to take full advantage of the Dolby
Digital bass redirection circuitry, we
recommend that you set the cut off frequency
on the sub woofer as high as possible.
recommend that you set the cut off frequency
on the sub woofer as high as possible.
When placing surround speakers behind you
(wide room)
Tips
• When you set up the surround back speaker, set the
speaker at least 1 meter behind the listening
position. It is recommended to place the speaker at
an equal distance from the surround left and right
speakers. If there is no space behind the listening
position, set the speaker above the listening position
by placing it on a stand or hanging it from the
ceiling. To prevent speaker damage or injury in case
the speaker falls, make sure that it is properly fixed
in place.
position. It is recommended to place the speaker at
an equal distance from the surround left and right
speakers. If there is no space behind the listening
position, set the speaker above the listening position
by placing it on a stand or hanging it from the
ceiling. To prevent speaker damage or injury in case
the speaker falls, make sure that it is properly fixed
in place.
• Since the active sub woofer does not emit highly
directional signals, you can place it wherever you
want.
want.
Note
Do not place the center speaker further away from the
listening position than the front speakers.
listening position than the front speakers.
Specifying the speaker
parameters
parameters
1
Press MAIN MENU repeatedly to select
“
“
SET UP
”.
2
Press
or
to select the parameter
you want to adjust.
Note
Some speaker settings may appear dimmed in the
display. This means that they have been changed
automatically due to other speaker settings or may
not be adjustable.
display. This means that they have been changed
automatically due to other speaker settings or may
not be adjustable.