Sony STR-DG1100 用户手册

When you turn the TV off by using the power 
button on the TV’s remote, the receiver and 
the connected components turn off 
automatically.
You can also use the receiver’s remote to turn 
off the TV.

Press TV, then press AV ?/1. 

The TV, receiver and connected components 
are turned off.

• Set the TV power supply interlock function to on 

before using the System Power Off function. For 
details, see the operating instructions of the TV.

• Depending on the status, the connected 

components may not be turned off. For details, see 
the operating instructions of the connected 
components.

• The location, label of the remote will vary 

according to models and areas.

If you experience any of the following 
difficulties while using the HDMI CONTROL 
function, use this troubleshooting guide to 
help you remedy the problem.

• Check the HDMI connection (page 3).
• Make sure “HDMI Control” is set to “ON” 

in HDMI settings menu. 

• Make sure the connected component is 

compatible with the HDMI CONTROL 
function.

• Check the HDMI CONTROL settings on 

the connected component. See the 
operating instructions of the connected 
component.

• If you change the HDMI connection, 

connect/disconnect the AC power cord, or 
there is a power failure, repeat the 
procedures of “Preparing for HDMI 
CONTROL function” (page 4).

• Make sure the TV is compatible with the 

System Audio Control function.

• If the TV does not have System Audio 

Control function, set the “HDMI Audio” 
settings in HDMI settings menu to
– “TV+AMP” if you want to listen to the 

sound from the TV speaker and 
receiver.

– “AMP” if you want to listen to the 

sound from the receiver.

• You cannot listen to the sound of a 

component connected to the receiver 
while a TV is selected as the input on the 
receiver.
– Change the input of the receiver to 

HDMI when you want to watch a 
program on a component connected to 
the receiver.

TV

AV ?/1