Sony STR-DG910 用户指南

US

D:\CANNES\SONY_HA\JOB 2007\STR-DG910\IM_910_US\STR-DG910_data\GB03CON_STR-
DG910-UC.fm

STR-DG910

3-094-430-11 (1)

Select “8-A. CAL” in the amplifier menus. For 
details on adjusting the parameters, see 
“Navigating through menus” (page 45) and 
“Overview of the menus” (page 46).

x AUTO CAL (Auto Calibration on/

• A.CAL NO

The Auto Calibration function is turned off.

• A.CAL YES

The Auto Calibration function is turned on.
To start Auto Calibration, press 

x CAL TYPE (Calibration type)

• ENGINEER

Sets the frequency characteristics to a set 
that matches that of the Sony listening room 
standard.

• FLAT

Makes the measurement of frequency from 
each speaker flat.

• FRT REF

Adjusts the characteristics of all speakers to 
match the characteristics of the front 
speaker.

x CAL LOAD (Preset measurement 

• LOAD NO

Select this when you do not want to load the 
saved Auto Calibration result.

• LOAD YES

Select this when you want to load the saved 
Auto Calibration result.

* You can select this parameter only when you have 

performed the Auto Calibration and saved the 
settings.

 

You can adjust the speaker levels and balance 
while listening to the test tone from your 
listening position.

The receiver employs a test tone with a frequency 
centered at 800 Hz.

The RECEIVER indicator lights up and 
receiver operation is activated.

.

>

m

M

x

X

H

<

<

B

V

v

B

MASTER 
VOL +/–

Input 
buttons