Siemens C62 用户指南

C62 en SUG, A31008-H6880-A1-2-7619 (15. December 2003, 14:46)

© 

Siem

ens AG 2002

, I

:\Mob

il\L55\C

62_Z

w

ei

tau

sgabe\en\_v

on_i

tl\C62_

Startup.fm

The battery is not supplied fully 

charged. Plug the charger cable into 

the bottom of the phone, plug the 

power supply unit into the mains 

power socket and charge for at least 

3,5 hours.

 

During charging.

Charging time
An empty battery is fully charged af-

ter about 3,5 hours. Charging is only 

possible within the temperature 

range of +0 °C to +45 °C. If the tem-

perature rises/falls above/below this, 

the charge symbol flashes a war-

ning. The voltage specified on the 

power supply unit must not be ex-

ceeded.
To obtain maximum performance of 

the battery it must be fully charged 

and then emptied at least five times.

Charge icon not visible
If the battery was completely dis-

charged, the charging symbol will 

not be immediately visible when 

connected to the charger. In this 

case the battery is fully charged after 

4,5–5,5 hours.
Only use the charger provided!

Display while in service
Charge level display during opera-

tion (empty–full):

 

A beep sounds when the battery is 

nearly empty. The charge level of the 

battery is displayed correctly only af-

ter uninterrupted charging/discharg-

ing. You should therefore not remove 

 and where 

possible not interrupt charging prema-

Performance 
A full battery will give you between 

60–250 hours of standby time or 

1,5–4,5 hours of talktime.

Note
The charger will become hot after extended 

use. This is normal and not dangerous.