Intel RS2BL080 用户手册
Intel® RAID Controller RS2BL080 Technical Product Specification
Hardware
2.3.2
Flash ROM
An 8-MB CFI-compliant flash ROM is used to accommodate RAID firmware and RAID BIOS
Console 2 OpROM.
Console 2 OpROM.
2.3.3
Boot Strap ROM (SEEPROM)
The serial bootstrap ROM is used to configure the LSI*SAS2108 ROC before the server board
configures the PCI Express* registers. The bootstrap ROM sets the Phase Lock Loop (PLL)
dividers, bootstrap configuration, and so on.
configures the PCI Express* registers. The bootstrap ROM sets the Phase Lock Loop (PLL)
dividers, bootstrap configuration, and so on.
2.3.4
NVSRAM
A 32-KB NVSRAM is used to store disk and drive setup information.
2.3.5
SDRAM (Cache)
The Intel
®
RAID Controller RS2BL080 includes 512 MB of integrated DDR2 800 MHz ECC
SDRAM memory. This DIMM is connected directly to the memory controller interface bus of the
ROC and serves as storage for the executable code transferred from the flash. It also serves as
cache during RAID transactions. Cache mode selection takes immediate effect while the server
is online and is available on a per virtual drive basis. The ROC memory controller provides
single-bit ECC error correction with multi-bit detection support.
ROC and serves as storage for the executable code transferred from the flash. It also serves as
cache during RAID transactions. Cache mode selection takes immediate effect while the server
is online and is available on a per virtual drive basis. The ROC memory controller provides
single-bit ECC error correction with multi-bit detection support.
The Intel
®
RAID Controller RS2BL080 supports the optional Intel
®
RAID Smart Battery
AXXRSBBU7 which can be mounted directly as a daughter card on the RAID controller or
connected remotely to the RAID controller with Remote Extender Board (REB) daughter card
through a supplied cable to provide a battery backup option for data cached in the memory. See
Figure 3
connected remotely to the RAID controller with Remote Extender Board (REB) daughter card
through a supplied cable to provide a battery backup option for data cached in the memory. See
Figure 3
B
C
A
AF003241
Figure 3 Remote Installation with Remote Extender Board
Revision 1.0
Intel order number E64388-001
11