Roland F-110 用户指南

 

Before You Play

 

The pedals perform the following operations. You’ll use them 

mainly when playing piano.

 

fig.Pedals-e.eps_88

 

Use this pedal to sustain the sound. 

While this pedal is held down, notes will be sustained for an 

extended time even if you release your fingers from the 

keyboard.

The length of the sustain will change subtly depending on 

how deeply you press the pedal.

On an acoustic piano, holding down the damper pedal will 

cause the strings for notes other than the ones you actually 

play to vibrate in sympathy with what you’ve played, 

producing a rich resonance. The F-110 simulates this 

sympathetic vibration (damper resonance).

 

You can modify the sound of the sympathetic vibration. 

 

This pedal sustains only the notes of the keys that were 

already pressed when you pressed the pedal.

 

This pedal is used to make the sound softer.

Playing with the soft pedal depressed produces a sound that 

is not as strong as when otherwise played with the 

equivalent strength. This is the same function as the left 

pedal of an acoustic piano.

The softness of the tone can be varied subtly by the depth to 

which you press the pedal.

 

You can switch the function of the sostenuto pedal and 

 

If you disconnect the pedal cable from the F-110 while 

the power is turned on, the pedal effect will remain 

applied. You must connect or disconnect the pedal 

cable while the F-110’s power is switched off.

You can use headphones to enjoy the F-110 without 

disturbing those around you, such as at night. Since the 

F-110 has two headphone jacks, two people can also use 

headphones simultaneously. 

If you’re using only one set of headphones, you may connect 

them to either of the two headphone jacks.

 

fig.Headphones-e.eps_88

 

If headphones are connected, no sound will be output from 

the F-110’s speakers.

 

About the Pedals

 

Listening through Headphones

F-110_r_e.book 22 ページ ２００９年６月３０日　火曜日　午後１２時６分