Roland F-110 用户指南
60
Various Settings
2.
Press and hold the [Others] button and use the [–]
or [+] button to select “buP.”
The display will indicate “buP” and the [
] button will
blink.
fig.d-buP.eps_88
3.
Press the [
] button.
The display will indicate “Sur,” and the [
] button and
[
] button will blink.
fig.d-Sur.eps_88
If you decide not to save the settings, press the [
]
button.
4.
To save the settings, press the [
] button.
The “buP” message flashes in the display.
Never turn off the power while “buP” is blinking in the
display.
When the memory backup has been completed, the display
will indicate “Fnc.”
fig.d-Fnc.eps_88
For details on the settings stored by the Memory Backup
5.
The settings you’ve changed in Function mode can be
restored to their factory-set condition. This operation is called
“Factory Reset.”
Execute this operation if you want the settings you’ve stored
using Memory Backup to be returned to their original state.
When you execute “Factory Reset,” all settings you’ve
stored up to that point will be cleared, and reset to their
factory-set condition.
Executing this operation will not erase the songs from
internal memory. If you want to erase all songs from the
1.
The display will indicate “Fnc” and you’ll be in Function
mode.
2.
Press and hold the [Others] button and use the [–]
or [+] button to select “Fct.”
The display will indicate “Fct” and the [
] button will
blink.
fig.d-Fct.eps_88
3.
Press the [
] button.
The display will indicate “Sur,” and the [
] button and
[
] button will blink.
fig.d-Sur.eps_88
If you decide not to execute the Factory Reset, press the
[
] button.
Restoring the Settings to the Factory
Condition (Factory Reset)
Condition (Factory Reset)
F-110_r_e.book 60 ページ ２００９年６月３０日 火曜日 午後１２時６分