Roland F-110 用户指南

 

Troubleshooting

 

The Tone buttons [E. Piano], [Strings], and [Others] also operate as buttons that select 
“Recommended Tones.”
With the factory settings, connecting the F-110 to a computer running “VIMA TUNES PLAYER” and 
selecting a song produced for the VIMA (VIMA TUNES) will automatically cause sounds appropriate 
for that song to be assigned to the [E. Piano], [Strings], and [Others] Tone buttons, so that you can 
select “recommended” sounds by pressing one of these buttons.
You can also make settings so that “recommended” sounds are not automatically assigned.

 

When you are using Dual performance or Split performance, and different effects are specified for 
the two selected tones, the effect will not be applied to Tone 2 (when using Dual performance) or 
the left-hand tone (when using Split performance).

—

 

The F-110’s piano sound faithfully simulates the depth and resonance of an acoustic piano, and this 
may give the impression of reverberation even if you’ve defeated the Reverb effect.
* Lowering the Key Off Resonance (p. 54) may improve matters.

—

 

On an acoustic piano, the approximately one and a half octaves of notes at the upper end of the 
keyboard will continue sounding regardless of the damper pedal. These notes also have a 
somewhat different tonal character. F-110 faithfully simulate this characteristic of acoustic pianos. 
On the F-110, the range that is unaffected by the damper pedal will change according to the 
transpose setting.

—

 

Piano sounds that have a brilliant and crisp character contain substantial high-frequency 
components that may sound as though a metallic ringing has been added. This is because the 
characteristics of an actual piano are being faithfully reproduced; it does indicate a malfunction. 
This ringing is more obtrusive if the reverb effect is applied heavily, so you may be able to 
minimize it by decreasing the reverb.

 

It is likely that there is some other reason (such as resonances within the unit). Please contact your 
dealer or the nearest Roland service center.

—

 

Performing at high volumes may cause the speakers or objects near the F-110 to resonate. 
Fluorescent lights or glass doors may also resonate sympathetically. In particular, this is more 
likely to occur for lower notes and higher volumes. You can take the following measures to 
minimize resonances.

•

Locate the speakers 10–15 cm away from walls or other surfaces.

•

Keep the volume down.

•

Move away from the objects that are resonating.

 

It is likely that there is some other reason. Please contact your dealer or a nearby Roland service 
center.

—

If you set the volume to the maximum setting, the sound may be distorted depending on how you 
perform.
If this occurs, turn down the volume.

 

Does the indication “dEL” appear in the screen?
Internal songs cannot be played if you have recorded a performance and not yet saved it. Delete this 
performance data, and then play back the song.

 

Could a track be muted? Muted tracks are not played back. Hold down the [

] button and 

press [E. Piano], [Strings] and/or [Others] (the indicator must light).

 

Has one of the track buttons for recording been selected?

p. 37
p. 39

 

Your recorded performance will disappear if you switch off the F-110’s power or select a song. 
There is no way to recover the lost performance. Before you turn off the power, save your recorded 
performance in internal Memory.

F-110_r_e.book 67 ページ ２００９年６月３０日　火曜日　午後１２時６分