Roland Fantom-Xa 业主指南
12
Panel Descriptions
fig.Front
D BEAM
Switches D Beam function on/off. You can apply a variety of effects
to sounds simply by moving your hand (p. 80).
to sounds simply by moving your hand (p. 80).
[PAD TRIGGER]
You can use the D Beam controller to control the sounding of the
pads (p. 82).
pads (p. 82).
[SOLO SYNTH]
[ASSIGNABLE]
You can assign a variety of parameters and functions to D Beam to
modify the sound in realtime (p. 82).
modify the sound in realtime (p. 82).
*
Hold down [SHIFT] and press one of the corresponding buttons to
access the D BEAM setting screen.
access the D BEAM setting screen.
VOLUME knob
Adjusts the overall volume that is output from the rear panel
OUTPUT A (MIX) jacks and PHONES jack (p. 16).
OUTPUT A (MIX) jacks and PHONES jack (p. 16).
[V-LINK]
Switches the V-LINK function on/off (p. 212).
Press this button to access the V-LINK setting screen.
Press this button to access the V-LINK setting screen.
ARP/RHY
BEAT (Beat Indicator)
This blinks in sync with the tempo and beat.
[ARPEGGIO]
[HOLD]
[RHYTHM]
*
Hold down [SHIFT] and press [ARPEGGIO] or [RHYTHM] to
access ARPEGGIO or RHYTHM setting screen.
access ARPEGGIO or RHYTHM setting screen.
REALTIME CONTROL
REALTIME CONTROL knob (
)
Depending on the parameter or function that is assigned, you can
use the knobs to modify the sound in realtime (p. 83).
use the knobs to modify the sound in realtime (p. 83).
ASSIGNABLE switch ([
], [
])
Use these buttons to switch the assigned parameter or function to
modify the sound in realtime (p. 84).
modify the sound in realtime (p. 84).
*
Hold down [SHIFT] and press (or rotate) one of the above switches (or
knobs) to access the corresponding setting screen.
knobs) to access the corresponding setting screen.
[OCTAVE] (+/-)
Transposes the pitch of the keyboard in 1 octave units (-3– +3
octaves) (p. 33).
octaves) (p. 33).
*
Hold down [SHIFT] and press [OCTAVE] to transposes the pitch in
semitones (p. 33).
semitones (p. 33).
SEQUENCER
Perform sequencer operations such as playback and record.
[TEMPO]
[PATTERN]
[LOOP PLAY]
[ERASE/UNDO]
Cancels the most recent song edit or recording operation.
[
]
Moves the song position to the top. If you press this during
playback, you will return to the beginning of the song and stop (p.
120).
playback, you will return to the beginning of the song and stop (p.
120).
[
] [
]
Moves the song position to the first beat of the previous or next
measure (p. 120).
measure (p. 120).
[
]
Controls sequencer stop.
[
]
Controls sequencer play.
*
While stopped, you can hold down [SHIFT] and Press [
] to
[
]
The display changes to the Recording Standby window. (p. 124, p.
128)
If you press this during recording, the Rehearsal function will be
activated (p. 127).
128)
If you press this during recording, the Rehearsal function will be
activated (p. 127).
Front Panel
1
2
15
3
4
7
11
13
14
12
10
9
5
6
8
1
2
3
4
5
Fantom-Xa_e.book 12 ページ 2004年10月22日 金曜日 午後2時3分