Roland Fantom-Xa 业主指南
203
Data Management Functions/
Reset to Factory Settings (Factory Reset)
Reset to Factory Settings (Factory Reset)
UTILITY MENU screen
fig.UtilityMenu
Here’s how all user data in the user area can be saved on a memory
card.
card.
The following user data will be saved.
*
In order to execute User Backup, the memory card must have
approximately 16MB or more free area.
approximately 16MB or more free area.
1.
Insert a memory card into the slot.
2.
Press [MENU] to open the Top Menu window.
3.
Press
or
to select “2. Utility,” and then press
[ENTER].
The UTILITY MENU screen appears.
4.
Press [F1 (BACKUP)].
A message will ask you for confirmation.
5.
To execute the backup, press [F6 (EXEC)].
*
To cancel, press [F5 (CANCEL)].
Data that’s been backed up on a Fantom-Xa must not be used to
perform a restore into some other device in the Fantom-X series.
perform a restore into some other device in the Fantom-X series.
Here’s how user data saved on a memory card by the User Backup
operation can be reloaded back into the user memory of the Fantom-
Xa.
operation can be reloaded back into the user memory of the Fantom-
Xa.
*
When you execute User Restore, the current contents of the user area
will be completely erased.
will be completely erased.
*
Data resulting from a backup performed on some other device in the
Fantom-X series must not be used to perform a restore into a Fantom-
Xa.
Fantom-X series must not be used to perform a restore into a Fantom-
Xa.
1.
Into the slot, insert the memory card on which user data has
been saved.
2.
Press [MENU] to open the Top Menu window.
3.
Press
or
to select “2. Utility,” and then press
[ENTER].
The UTILITY MENU screen appears.
4.
Press [F2 (RESTORE)].
A message will ask you for confirmation.
5.
To proceed with the restoration, press [F6 (EXEC)].
*
To cancel, press [F5 (CANCEL)].
6.
When the display indicates “Completed. Turn the Power off
and on again,” turn the power off, then on again.
If, after executing the User Backup operation, you add a file to
the Fantom-Xa’s internal memory (e.g., the TMP folder), the
message “User Area Full!” may appear when you execute the
User Restore operation, making it impossible to successfully
carry out the restoration.
In this case, delete (p. 205) the file that you added after
performing the backup, and then execute the Restore operation
once again.
the Fantom-Xa’s internal memory (e.g., the TMP folder), the
message “User Area Full!” may appear when you execute the
User Restore operation, making it impossible to successfully
carry out the restoration.
In this case, delete (p. 205) the file that you added after
performing the backup, and then execute the Restore operation
once again.
This restores all data in the Fantom-Xa to the factory-set condition
(
(
Factory Reset
).
If there is important data you’ve created that’s stored in the
Fantom-Xa’s User memory, all such data is discarded when a
Factory Reset is performed (
Fantom-Xa’s User memory, all such data is discarded when a
Factory Reset is performed (
the data of the internal user
memory will be lost
). If you want to keep the existing data,
save it on a memory card (User Backup) or save it via USB to
your computer (
your computer (
1.
Press [MENU] to open the Top Menu window.
2.
Press
or
to select “2. Utility,” and then press
[ENTER].
The UTILITY MENU screen appears.
3.
Press [F3 (FACTORY)].
A message will ask you for confirmation.
4.
To execute the Factory Reset, press [F6 (EXEC)].
*
To cancel, press [F5 (CANCEL)].
5.
When the display indicates “Completed. Turn the Power off
and on again,” turn the power off, then on again.
Never switch off the Fantom-Xa while executing the Factory
Reset.
Reset.
Here’s how to format (initialize) a memory card.
When you execute the Format operation, the contents of the
memory card will be completely erased.
memory card will be completely erased.
1.
Insert a memory card into the slot.
2.
Press [MENU] to open the Top Menu window.
3.
Press
or
to select “2. Utility,” and then press
[ENTER].
The UTILITY MENU screen appears.
4.
Press [F4 (FORMAT)].
A message will ask you for confirmation.
5.
To format the card, press [F6 (EXEC)].
*
To cancel, press [F5 (CANCEL)].
Backing Up User Data
(User Backup)
(User Backup)
• Performances
• Patches
• Rhythm sets
• Rhythm Patterns
• Rhythm Groups
• Multisamples
• Songs
• Samples
• Arpeggio styles
• Chord forms
• System settings
Restoring User Data that
You Backed Up
(User Restore)
You Backed Up
(User Restore)
Factory Reset
Initializing a Memory Card
(Card Format)
(Card Format)
Fantom-Xa_e.book 203 ページ ２００４年１０月２２日 金曜日 午後２時３分