Roland Fantom-Xa 业主指南

 

The function which allows you use MIDI messages to make changes in realtime to the tone parameters is called the 

 

. Up to four 

Matrix Controls can be used in a single patch.

To use the Matrix Control, specify which MIDI message (CTRL Source parameter) will be used to control which parameter (CTRL Destination 
parameter), and how greatly (CTRL Sens parameter), and the tone to which the effect is applied (CTRL Switch parameter).

 

Velocity and Key follow correspond to Note messages.

 

Although there are no MIDI messages for LFO 1 through TVA Envelope, they can be used as Matrix Control. In this case, you can change the 
tone settings in realtime by playing patches.

• If you want to use common controllers for the entire Fantom-Xa, select “SYS CTRL1”–”SYS CTRL4.” MIDI messages used as System Control 

 

There are parameters that determine whether or not Pitch Bend, Controller Number 11 (Expression) and Controller Number 64 (Hold 1) are 
received (p. 51). When these settings are “ON,” and the MIDI messages are received, then when any change is made in the settings of the 
desired parameter, the Pitch Bend, Expression, and Hold 1 settings also change simultaneously. If you want to change the targeted 
parameters only, then set these to “OFF.”

• There are parameters that let you specify whether specific MIDI messages will be received for each channel in a performance (p. 79). When a 

patch with Matrix Control settings is assigned to a part, confirm that any MIDI messages used for the Matrix Control will be received. If the 
Fantom-Xa is set up such that reception of MIDI messages is disabled, then the Matrix Control will not function.

 

CTRL 1–4 Source

OFF, CC01–31, 33–95, 
PITCH BEND, 
AFTERTOUCH, 
SYS CTRL1–4, 
VELOCITY, 
KEY FOLLOW, 
TEMPO, LFO1, 
LFO2, PITCH ENV, 
TVF ENV, TVA ENV

MIDI message used to change the tone parameter with the Matrix Control

 

 Matrix control will not be used.

 

 Controller numbers 1–31, 33–95

 

 Pitch Bend    

 

 Aftertouch

 

 MIDI messages used as common matrix controls

 

 Pressure you press a key with    

 

 Keyboard position with C4 as 0

 

 The specified tempo (sequencer tempo) or the tempo of an external MIDI sequencer.

 

 LFO 1    

 

 LFO 2

 

 Pitch envelope    

 

 TVF envelope    

 

 TVA envelope

 

CTRL 1–4 
Destination 
1–4

OFF, PITCH, CUTOFF, 
RESONANCE, LEVEL, 
PAN, OUTPUT LEVEL, 
CHORUS SEND, 
REVERB SEND, 
LFO1/2 PITCH DEPTH, 
LFO1/2 TVF DEPTH, 
LFO1/2 TVA DEPTH, 
LFO1/2 PAN DEPTH, 
LFO1/2 RATE, 
PCH ENV A-TIME, 
PCH ENV D-TIME, 
PCH ENV R-TIME, 
TVF ENV A-TIME, 
TVF ENV D-TIME, 
TVF ENV R-TIME, 
TVA ENV A-TIME, 
TVA ENV D-TIME, 
TVA ENV R-TIME, 
TMT, FXM DEPTH, 
MFX CTRL1–4, TIME

Tone parameter that is to be controlled when using the Matrix Control

Up to four parameters can be specified for each Matrix Control, and controlled simultaneously.

 

★

Fantom-Xa_e.book 49 ページ ２００４年１０月２２日　金曜日　午後２時３分