Roland Fantom-Xa 业主指南

 

You can use the force with which keys are played to control the way each waveform is played.

 

fig.TMT-V.e

 

Wave Level

0–127

Volume of the waveform

Wave Pan

L64–0–63R

Left/right position of the waveform

Wave Rnd Pan Sw

OFF, ON

Use this setting to cause the waveform’s panning to change randomly each time a key is pressed (ON) 
or not (OFF).

 

Wave Alter Pan Sw

OFF, ON, 
REVS

This setting causes panning of the waveform to be alternated between left and right each time a key 
is pressed.

Set this to “ON” to pan the wave according to the Alternate Pan Depth parameter (p. 64) settings, 
or to “REVS” when you want the panning reversed.

 

Wave Coarse Tune

-48– +48

Pitch of the waveform’s sound (in semitones, +/-4 octaves)

Wave Fine Tune

-50– +50

Pitch of the waveform’s sound (in 1-cent steps; one cent is 1/100th of a semitone)

 

Velocity Control

OFF, ON, 
RAN

Determines whether a different waveform is played (ON) or not (OFF) depending on the force with 
which the key is played (velocity).

 

 The rhythm tone’s constituent waveforms will sound randomly, regardless of any Velocity 

messages.

Velo Fade Lower

0–127

Determines what will happen to the waveform’s level when the rhythm tone is played at a velocity 
lower than Velo Range Lower.

If you don’t want the waveform to sound at all, set this parameter to “0.”

Velo Range Lower

1–UPPER

Specifies the lowest velocity at which the waveform will sound.

Velo Range Upper

LOWER–127

Specifies the highest velocity at which the waveform will sound.

Velo Fade Upper

0–127

Determines what will happen to the waveform’s level when the rhythm tone is played at a velocity 
greater than Velo Range Upper.

If you don’t want the waveform to sound at all, set this parameter to “0.”

Velo Range Lower

Velo Range Upper

Velo Fade Lower

Velo Fade Upper

Level

The waveform sounded 
when you play softly

The waveform sounded 
when you play strongly

Velocity

Fantom-Xa_e.book 61 ページ ２００４年１０月２２日　金曜日　午後２時３分