Roland Fantom-Xa 业主指南
67
Playing in Performance Mode
The Fantom-Xa has two performance groups, including the User
group and Preset groups, with each group storing 64 performances,
for a total of 128 performances.
group and Preset groups, with each group storing 64 performances,
for a total of 128 performances.
USER
This is the group inside the Fantom-Xa which can be rewritten.
Performances you yourself create can be stored in this group. The
Fantom-Xa contains 64 preset performances.
Performances you yourself create can be stored in this group. The
Fantom-Xa contains 64 preset performances.
PRST (Preset)
This is the group inside the Fantom-Xa which cannot be rewritten.
However you may modify the settings of the currently selected
performance, and then store the modified performance in User
memory. The Fantom-Xa contains 64 preset performances.
However you may modify the settings of the currently selected
performance, and then store the modified performance in User
memory. The Fantom-Xa contains 64 preset performances.
CARD (Memory Card)
This group lets you use patches stored on a memory card inserted in
the rear panel PC card slot. Since the data in this group can be
rewritten, you can use this group to store patches that you create.
the rear panel PC card slot. Since the data in this group can be
rewritten, you can use this group to store patches that you create.
1.
Press [LAYER/SPLIT].
2.
Press [CURSOR] to move the cursor to the performance
group.
fig.PfmSelect.e
3.
Use the VALUE dial, or [INC] [DEC] to select a performance
group.
4.
Press [CURSOR] to move the cursor to the performance
number.
5.
Use the VALUE dial or [INC] [DEC] to select the
performance number.
You can display a list of performances and select a performance from
that list.
that list.
1.
Press [LAYER/SPLIT].
2.
Press [ENTER].
The PERFORMANCE LIST screen appears.
fig.PfmList
3.
To switch the performance group, press
or
.
4.
Use the VALUE dial, [INC] [DEC], or
to select the
performance.
5.
Press [ENTER] to close the PERFORMANCE LIST screen.
You can bring together your favorite and most frequently used
performances in one place by registering them in the Favorite
Performance. By using this function you can quickly select your
favorite performances.
performances in one place by registering them in the Favorite
Performance. By using this function you can quickly select your
favorite performances.
1.
Press [LAYER/SPLIT].
2.
Press [ENTER] and then press [F1 (FAVORIT)].
The FAVORITE PERFORMANCE screen appears.
fig.FavoritePfm
3.
Use the VALUE dial, [INC] [DEC], or
to select a
performance number.
To switch banks, press
.
4.
Press [ENTER] to select the performance.
Registering a Favorite Performance
You can register a total of 64 Performances (8 sounds x 8 banks) as
favorite Performance.
favorite Performance.
1.
Select the Performance that you wish to register.
2.
Press [ENTER] and then press [F1 (FAVORIT)].
The FAVORITE PERFORMANCE screen appears.
3.
Press
to select the bank in which you wish to
register the Performance.
4.
Use the VALUE dial, [INC] [DEC], or
to select the
number to which you wish to register.
5.
Press [F3 (REGIST)] to execute the registration.
*
To cancel, press [EXIT].
By pressing [F2 (REMOVE)] you can cancel the Performance
registration that is selected in the FAVORITE PERFORM screen.
registration that is selected in the FAVORITE PERFORM screen.
Selecting a Performance
Selecting Performances from the
List
List
Performance number
Performance group
Selecting Favorite Performances
Fantom-Xa_e.book 67 ページ ２００４年１０月２２日 金曜日 午後２時３分